Ford Bronco Traction Board Bracket - FREE US SHIPPING

Free US shipping!  This traction board bracket (aka Recovery Board Bracket) will store your traction boards up and out of the way keeping them out of sight and out of mind until you really need them. Designed and fabricated in the USA in Draper, Utah, these are cut and bent from 12 gauge carbon steel and powder coated for durability and have no moving parts that can rattle. Designed to fit the standard mounting patterns of all recovery boards. These boards are designed to tuck up inside the 2021+ 4 door Bronco MIC hardtop, and behind the roll bar, so as not to impede rear visibility. You'll forget they're even there until you need them. Traction / Recovery Board Bracket designed and fabricated in the USA 12 gauge carbon steel has been powder coated for durability. Other lower quality parts use 14 gauge, or thinner, steel. No movable parts to rattle Flexible mounting options designed to fit ARB Tred Pro/GT and Maxtrax Signature recovery boards or any traction board with standard mounting holes The bracket supports board hole widths at either 4.2" or 10.63" and board hole lengths between 34" and 41" Flexible options to mount the brackets high or low on the roll bar Supplied with black stainless mounting hardware to mount the bracket Optional, budget-friendly, non-stainless hardware provided to mount your recovery boards to the bracket. Consists of 4 zinc bolts, 8 washers and 4 wing nuts. Notes on Bronco compatibility: 4 door 2021+ Ford Bronco - Fits all MIC hardtop models with exception of very early 2021 Broncos that may not have available nutserts in the roll bar. 2 door 2021+ Ford Bronco - Does not fit 2021+ Ford Bronco with soft top - The brackets technically fit soft top models, however you cannot retract the soft top all the way without interfering with the recovery board bracket. 2022+ Ford Bronco Raptor - Fits great Notes on traction board compatibility: All boards will fit when the Bronco top is removed ARB Tred GT traction boards - Fits well with lots of flexibility in mounting options (on top of, or underneath the brackets) ARB Pro traction boards - Fits tightly on top of the bracket only when the bracket is mounted in the lower position on the roll bar. Does not dramatically impede rearward visibility Maxtrax recovery boards - Most Maxtrax boards fit tightly on top of the bracket only when the bracket is mounted in the lower position on the roll bar. Does not dramatically impede rearward visibility. Note that Maxtrax Extreme recovery boards unfortunately will not fit with the MIC hardtop in place.