TN-400BTX Manual Belt-Drive Bluetooth Turntable in Walnut

Labor Day Sale through Sept 14th! Analog turntable with Bluetooth® Qualcomm® aptX™ transmitter that streams music from LP Records wirelessly ENJOY YOUR VINYL AND CUT THE CORD The TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input. A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive. For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure. Aluminum die-cast platter with 3-speed belt-drive A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-⅓, 45 and 78 rpm speeds. New low-resistance spindle A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction. Natural walnut veneer finish with laser-engraved logo The TN-400BT-X is available in natural varnished walnut veneer finish with laser-engraved TEAC logo. Built-in Phono EQ amplifier The TN-400BT-X has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion. S-shaped static-balanced tone-arm The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering of the tone-arm onto records. The tone-arm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tone-arm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal. Bluetooth® wireless audio streaming with Qualcomm® aptX™ Adaptive codec The TN-400BT-X's Bluetooth® wireless transmission system supports the higher quality Qualcomm® aptX™ Adaptive codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, then can still enjoy truly high-quality vinyl replay via Bluetooth®-equipped headphones or speakers. Connecting the TN-400BT-X to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status. Beautifully detailed The TN-400BT-X brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback. MM-type Cartridge from audio-technica The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback. MM-type Cartridge from audio-technica The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback. Features at a glance Robust high-density MDF plinth provides both vibration isolation and elegance Available in a selection of contemporary matt finishes, or a natural walnut veneer 3-speed belt-drive mechanism with aluminum die-cast platter (33-⅓, 45, 78 rpm) Low-resistance spindle for stable rotational speed Static-balanced S-shaped tone-arm with universal-type headshell Pre-installed MM-type AT95E cartridge from audio-technica Built-in Phono EQ Amplifier High-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmission Floating-construction using decoupled feet provides high feedback resistance Machined aluminum operation knobs and feet Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts GND terminal on rear panel RCA audio cable with GND wiring included       *This product does not have a USB digital output. Spec description Turntable section   Type Belt Drive Motor DC Motor Rotation Speeds 33-⅓, 45, 78 rpm Wow-and-Flutters 0.2% S/N Ratio more than 67dB (A-weighted) 60dB (unweighted, 20kHz, LPF) Turntable (Platter)   Material Aluminum Die-cast Diameter 30cm Tone-arm section   Type S-shaped, Static-balanced Effective Length 223mm Needle Pressure Range 0g to 5g Compatible Cartridge Weight 4g to 8g 14g to 18g (including Head-shell) Head-shell and Cartridge sections   Model of Cartridge audio-technica AT95E Type of Cartridge MM-type (VM-type) Frequency Response 20Hz to 20,000Hz Output Voltage 3.5mV (1kHz, 5cm/sec.) Channel Separation 20dB (1kHz) Output Balance 2.0 dB (1kHz) Needle Pressure 1.5g to 2.5g (appropriate value: 2.0g) Needle Life approx. 300 hours (depends on conditions) Coil Impedance 2.8kohms (1kHz) DC Resistance 410ohms Loading Resistance 47kohms Loading Capacity 100 to 200pF Coil Inductance 400mH (1kHz) Static Compliance 20 × 10-6cm/dyne Dynamic Compliance 6.5 × 10-6cm/dyne (100Hz) Needle Shape Joint-oval 0.3 × 0.7mil Cantilever Aluminum Pipe Vertical Tracking Degree 20 degrees Overall Dimensions 17.0(W) × 17.2(H) × 30.5(D) mm Weight 5.7 g Head-shell Weight 10g (including nuts, screws, and wires) Analog Output section   Connectors RCA jack × 1 pair (Gold-plated) Output Voltage   PHONO 3.5mV +/-3dB LINE 155mV (-16dBV) Bluetooth® section   Bluetooth version 5.2 (DUAL MODE) Profile A2DP Codecs SBC, Qualcomm® aptX™ audio, Qualcomm® aptX™ Adaptive Operation Power   AC Adapter Input AC 100 - 240V, 50/60Hz AC Adapter Output DC 12V 500mA Power Consumption 1.5W or less Standby Power 0.5W or less Dimensions (including protrusions) 420(W) × 117(H) × 356(D) mm / 16.5"(W) × 4.6"(H) × 14.0"(D) Weight 4.9kg / 10.8lbs Operating temperature range 5°C to 35°C Included Accessories Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica AT95E installed), Platter, Dust Cover, Dust Cover Hinges × 2, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner's Manual (including Warranty Card)