Threaded Stud Glider

Nifty glider replaces threaded spikes or cones for loudspeaker or rack isolation and mobility with superb lateral stability. (With an efficient decoupling approach, spikes are not really needed at all.) Fiberglass reinforced dBNeutralizer-filled vinyl base with smooth polymer bottom handles virtually any weight load on bare or carpeted floor. With jam nut to lock-in height adjustment. (Superb also for use as turntable or amplifier feet.) Dimensions: width: 1.3" (33.3mm) · fully mounted height: ≈ .4" (10mm) Note: Sold individually, not as a set. Threads available: 8-32 (1/2" or 3/4" long) 10-32 (1/2" or 3/4" long) 1/4"-20 (1/2", 3/4", 1", 1.5" or 2" long) 5/16"-18 (1/2", 3/4", 1", or 2" long) 3/8"-16 (1", 1.5" or 2" long) 5/8"-11 (female for Salamander) M5 (16mm long) M6 (16mm, 20mm, 25mm, or 40mm long) M8 (16mm, 25mm, or 40mm long) M10 (25mm long) Metric thread pitch: M5=0.8, M6=1, M8=1.25, M10=1.5    Common manufacturer thread sizes Giant Threaded Stud Glider: Same as above with threaded stud embedded with fiberglass-reinforced dBNeutralizer into large Magic Slider. Broad footprint provides superior lateral stability, with ample dBNeutralizer "beef" to isolate the heaviest speakers in the most severe vibrational conditions (nearly five times more vibration-absorbing dBNeutralizer than regular Threaded Stud Gliders). Dimensions: width: 2.36" (60mm) · fully mounted height: ≈ .585" (15mm)   Threads available: 1/4"-20 (1/2", 3/4", 1", 1.5" or 2" long) 5/16"-18 (1/2", 3/4", 1", or 2" long) 3/8"-16 (1", 1.5" or 2" long) 5/8"-11 (female for Salamander) M6 (16mm, 20mm, 25mm, or 40mm long) M8 (16mm, 25mm, or 40mm long) M10 (25mm long) Metric thread pitch: M5=0.8, M6=1, M8=1.25, M10=1.5