Rain Mitt "For The Trees"

Items made to order | Usually ships in 2-5 business days Based in Philly | Est. 2018 **GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED** Garage Grown Gear review here. Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.            *Due to dye-sublimation, colors may vary slightly.     Designed, printed and sewn in Philadelphia, PA      Pattern by: Carlie London Care Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.         Hand wash with a gentle soap.           Do not iron.           Do not wring.           Drip-dry in shade.         Do not bleach.      Specs:     Dimensions:         Sm/Md: ~ 11.4" x 7.4"         Lg/Xl: ~ 12.2" x 7.5" Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm/Md size will fit most people with a base measurement of 6.5" - 7.75". A Lg/Xl size will fit most people with a base measurement of 7.5" - 8.25".     Weight:           Sm/Md: 1.07 oz / 30 grams         Lg/Xl: 1.21 oz / 34 grams              Materials:         Sublimated 3.3 oz/sqyd Challenge Sailcloth TX95         Sublimated 1.43 oz/sqyd Dyneema Composite Fabric         3M 9471LE Dyneema Tape         1/8" Shock Cord         1/2" Firm Nylon Grosgrain Ribbon         2 mm Neon Yellow Spectra Glove Pull         Cord Toggle         Cord Pull              Features:         Extremely Water-Resistant (as close to waterproof as you can get without welded seams)         Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)         One-handed wrist cinch fastener to tighten/loosen each mitt         Fully-Taped Seams         Large glove pull on each mitt for ease of donning         Shock cord wrist cinch to prevent water ingress         Loops for attaching mitten hooks         Unique Colorways         Ultralight Construction