
$693.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Ice bath water chiller The Pod Company Pod Chiller The Pod Company Pod Chiller is a water chiller that keeps your ice bath cold and filtered, so you never have to buy bags of ice again. You can pick from two versions. The Standard Chiller suits indoor use or climates below 85°F, where it holds the water at 41°F. The Chiller 2.0 handles hotter summers, cools to 39°F and takes its temperature setting from an app on your phone. Setup takes about 10 minutes with no plumbing, and you can add an Ice Pod Pro or Long Pod to the same order. A 20-micron filter pulls hair, skin cells, leaves and sand out of the water as it circulates. The bath stays clear for 4 weeks or more on the Standard Chiller and 6 weeks or more on the Chiller 2.0. You spend far less time draining and refilling the tub. Standard Chiller 41°F Climates below 85°F Chiller 2.0 39°F Hot climates Filtration 20 micron Runs 24/7 Setup 10 minutes Two hoses and a plug Ice bath water chiller How it works At 12 x 12 x 13 in. and 39 lb, the Standard Chiller is small enough to tuck in beside the tub. Compressor cooling A 1/3 hp compressor built from chest freezer parts draws 280 W, comparable to the freezer in your home. 1/3 hp Filter and pump unit On the Standard Chiller, the pump pushes water through the filter all day and night, and side access keeps filter changes quick. 24/7 GFCI plug The power cable ends in a US 110V plug with GFCI protection, ready for a normal wall outlet. 110V Indoor or outdoor It runs indoors or out, right beside the tub. A spot in the shade gives the best cooling and a longer life. Ice bath water chiller Key features No more bags of ice Skip the 15-40 lb a session would need A chiller for your climate Standard for mild weather, Chiller 2.0 for heat Clear water for weeks Fewer refills of the ice bath Quick to connect Hook up the hoses and plug it in Ice bath water chiller How to use it Setup Connect the hoses to your tub Connect the two hoses to the tub, then plug the chiller into a wall outlet. A detailed instruction manual and guided videos come in the box, with the winter care steps included. Pod option Add a pod to the order The Ice Pod Pro brings extra thick insulation for people up to 6 ft 7 in. The Long Pod adds a sturdy metal frame and fits people up to 6 ft 9 in. and 400 lb comfortably. Chiller 2.0 Step up to the Chiller 2.0 With the Chiller 2.0 you set the water temperature in an app over Bluetooth or on the unit's own display. Once the water hits your target, the unit cycles off, then restarts only when the water warms up again. Ice bath water chiller How it compares You're Here The Pod Company Pod Chiller The Standard Chiller or the Chiller 2.0, on its own or with a pod. Standard cools to 41°F Chiller 2.0 cools to 39°F 20-micron filter 110V plug Currently viewing The Pod Company Pod Chiller 2.0 The app-controlled chiller, on its own or with a pod. Cools to 39°F App control over Bluetooth 145 gal per hour flow 15.7 x 13.4 x 13 in. Shop the Chiller 2.0 Ice bath water chiller Frequently asked questions What comes in the box with each chiller?+ The Standard Chiller comes with two hose connectors and seal rings, hoses with hose insulation, a filter and pump unit, a power cable with a US 110V GFCI plug, and an instruction manual with guided videos. The Chiller 2.0 comes with two Click & Connect Hoses, an internal metal filter, a filter tightening key, a wrench, eight gaskets and the same manual and videos. What else do I need?+ An ice bath and a wall outlet. The Chiller 2.0 also takes the optional Chiller 2.0 Filter Canister, which adds up to 2 weeks of clean water. How big is the Pod Chiller?+ The Standard Chiller measures 12 x 12 x 13 in. and weighs 39 lb. The Chiller 2.0 measures 15.7 x 13.4 x 13 in. Which chiller suits my climate?+ The Standard Chiller suits indoor use and places that stay below 85°F most of the year. The Chiller 2.0 suits warm climates with more than 45 days a year above 85°F, and it keeps cooling in heat up to 110°F. Will it work with the ice bath I already have?+ Yes. The hoses connect to an Ice Pod Pro, a Long Pod or the ice bath you already own. How long does setup take?+ About 10 minutes. Connect the hoses to the tub and plug the chiller into the wall. How do I look after the filter?+ Clean the filter every 1-2 weeks on either chiller. Replace it once a month on the Standard Chiller and every 6-8 weeks on the Chiller 2.0. Can I use the chiller outdoors?+ Yes, it works outdoors as well as indoors. Move it inside in severe weather. Do not run it when temperatures can drop to 32°F or below; drain it and store it indoors. How is the Pod Chiller delivered?+ It ships by parcel carrier from warehouses in California and North Carolina and arrives in 2-5 business days in the mainland US. What warranty does the Pod Chiller carry?+ The Pod Company backs the chiller with a 2-year manufacturer warranty.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$693.00