Textar DOT4 LV Brake Fluid 1L

Textar DOT 4 ESP Low viscosity (LV) Brake and Clutch Fluid, 1 Liter Specifications & Performance: U.S. FMVSS No. 116 Dot 3 & Dot 4, SAE J 1073, SAE J 1704, ISO 4925 Class 6, (Also conforms to classes 3 & 4), JIS K2233 (Classes 3 & 4) BMW QV 34001; Ford M6C9103A, M6C65-A1, M6C65-A2 GM 16072, GMW 3356; Mazda MN 120 C; Suzuki 59100-510XD Toyota Class 3, Class 4; VW / Audi TL 766 Z **Textar DOT 4 ESP LV mixes safely with other brake and clutch fluids conforming to the above specifications. Typical Dry Boiling Point: 265 °C. (509 °F.) Typical Wet Boiling Point: 171 °C. (340 °F.) Typical Viscosity @ -40 °C.: 700 cSt NOT SUITABLE FOR VEHICLES WITH MINERAL BASED BRAKE OR CLUTCH SYSTEMS. The Textar DOT 4 ESP Low viscosity (LV) is an advanced low viscosity brake and clutch fluid based on the latest borate ester technology formulated for use with modern braking systems. Electronic Stability Program (ESP) systems require the brake fluid to flow quickly through very small orifices if the system to function is to function correctly and in colder climates this requires the use of a low viscosity fluid. Most European vehicle manufacturers now recommend DOT 4 LV fluids. Textar products are produced to standards beyond what would be normal. For example, this product has a minimum dry and wet boiling point of 260°C and 165°C respectively, greatly exceeding the DOT 4 minimums of 230°C / 155°C. This amounts to extra user safety and potentially product life. As one would expect from a major brake manufacturer, expertise gained from long experience of working with braking systems and vehicle manufacturers benefits our entire product range with products being tested to standards far above the normal. Features and Benefits: Outstanding low temperature viscosity to provide the best system response time in cold climates High boiling point to resist vapor lock High wet boiling point to give extra safety margin in service Good lubricity High thermal stability Controlled rubber swelling Anti-corrosion and oxidation protection Recommendations for use: Vehicles for which a Low Viscosity DOT 4 or regular DOT 4 fluid is specified Vehicles using modern braking systems –especially ESP / ASR systems Vehicles operating in very cold climates Also suitable for older vehicles Hydraulic clutch systems Storage and Handling: This product is hygroscopic –it will absorb water from the atmosphere; always ensure containers are tightly closed. Not compatible with mineral oil or petroleum based materials; any contamination may cause serious damage to the brake system. Product will strip paint –avoid contact with paint of lacquer. Store in original container in a clean and dry location. Product is of low toxicity but has an irritant effect on the eye. Avoid contact with eyes and skin. Observe normal good hygiene practices when handling this product. See the Material Safety Data sheet for fuller storage, handling and safety information.