Tesla Cybertruck CTX Front Bumper Integrated Power Systems

The factory Cybertruck auxiliary power pre-wire (found under the frunk liner and toggled on/off in the center screen) is limited to 350 continuous duty watts (rated 400 peak watts).  Educated enthusiasts will recognize this power limitation is simply impossibly low for operating an adequate strength winch or ultra-high powered off-road lighting.  And connecting a high load winch or lighting directly to the onboard 48v lithium battery is not an acceptable option either.   Rest easy, our engineers have developed several solutions including a base 12v conversion kit (sufficient for most lighting) and for winches (or ultra-high powered lighting) our highly innovative, self contained auxiliary power system complete with plug-and-play onboard BMU to ensure up to a huge 800 amps / 9600 watts of power!  Our optional power system enables using and works seamlessly with most all aftermarket 12v winches and the highest output 12v LED lighting.  The T Sportline high-output power systems are enclosed in a box which bolts-on in the frunk and includes a plug-and-play harness which includes a battery management unit and charger which is powered directly from the Cybertruck.   We offer two High-Output Power systems with varying battery chemistry and power levels.  Base battery chemistry is AGM is an absorbed glass mat lead-acid battery - these are very high performance, but weigh more than lithium ion.   Our premium batteries are deep-cycle LiFePO4 lithium ion dry cell batteries, which offer a significant light weight advantage.  The frunk mounted power box is 18" x 10" x 11".   Note - not compatible with Tesla Cybertruck Cooler for Frunk.     Standard Output 12v Auxiliary Power (suitable for most lighting) 12v converter system.  This is our entry-level base option which will enable running most lighting options (not recommended when selecting 8 Pod HXB high power lighting).  Will not work with any winch. Includes a bolt-on system to convert Cybertruck 48v auxiliary feed to 12v. Fits behind frunk tub, does not impact frunk space at all. Uses Cybertruck screen control to turn on/off lights. 350w Continuous Duty More details HERE   High Output 12v Auxiliary Power  (Required for Winch or max power lighting): 100Ah AGM (63lbs) - unlimited lighting run time with any package we offer, approximately 15 minutes of winch draw (max 1150A for 5 seconds) 120Ah Li Ion (30lbs) - unlimited lighting run time with any package we offer, approximately 20 minutes of winch draw (max 800A for 10 seconds) - 1800w Continuous Duty Stand-alone 12v power system, managed via Cybertruck 48v aux power. Mounts in frunk (enclosure) as shown. Uses key-fob(s) to turn on/off lights (Cybertruck screen control will be used to manage power system, not light controls)   What is included: Complete CTX Bumper Auxiliary Power System (Add-on to CTX Bumper) Frunk mounted enclosure (only applies to High-Output version)