Terrain 15 and 15G

********3D Print Files Only!********* Digital Download Only, 3d Print .stl files *********************************   CRAWLAGON - Terrain 15 and 15G (Has Grip!) I wanted to try something a little different on this one, more of a trail ride vibe piece. Has boulders, rocks, Tree stump, logs and a small hill that you can approach for different angles to mix it up. All of which has grip added for maximum traction and the non grip version is included. If you really want to mix it up try it at an angle with the XL Any Angle Pack!   Specs:  Tiles: 10 Tiles, 98mm (3.85") tall, 714mm (28") long  Recommended Crawlers: 1/30th - 1/32nd scale. Grip: no Grip and Grip level G1 is included .3mf file included: Yes for both Standard or XL size: Standard    Each tile is 150mm wide  and are interlocked by locking pins underneath. You can configure and re-configure any way you would like! Join our CRAWLAGON facebook group and show off your builds. ENJOY!!!! 3D printing settings Print Instructions - *** WHEN PRINTING THE TEXTURED TILES YOU WILL GET AN ERROR IN YOUR SLICER. JUST PRINT ANYWAY AND IT WILL WORK. DO NOT ADD SUPPORTS*** - Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft. - Different sized pins are included to compensate for any bed leveling issues and different materials. - I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures. - If you are trying to conserve material on these big prints I have had luck running: Top Layers 4, Bottom Layers 3, Walls 3, infill Lightning 15%. (the walls and base will flex but hold up fine to the weight of a crawler)