Teensy OctoWS2811 LED Adapter – High-Speed RGB LED Control

This Teensy OctoWS2811 adaptor board connects Teensy 3.x, Teensy 4.0,or Teensy 4.1 microcontrollers to thousands of LEDs using the OctoWS2811 Library. The Teensy OctoWS2811 LED Adapter is the ultimate solution for driving large numbers of WS2811/WS2812 addressable LEDs with precision and speed. Designed to work seamlessly with the Teensy microcontrollers, it allows for smooth, flicker-free control of up to 8 parallel LED strips, dramatically increasing refresh rates and reducing lag in large LED installations. OctoWS2811 Key Features: High-Speed Parallel Output – Drive up to 8 independent WS2811/WS2812 LED strips simultaneously, maximizing refresh rates for smooth animations. Optimized Signal Processing – Uses OctoWS2811 library for efficient DMA-based LED control, reducing CPU load. Simple Connectivity – Features an RJ45 output for easy wiring and compatibility with CAT6 cables, ensuring reliable long-distance signal transmission. 5V Logic Compatibility – Onboard 74HCT245 buffer chip ensures proper 5V signal levels for WS2811/WS2812 LEDs. Ideal for Large LED Installations – Perfect for LED walls, stage lighting, art installations, and interactive projects requiring high-performance lighting control. Easy Integration – Works with Arduino IDE and the Teensyduino environment, making it simple to develop custom LED animations. Applications: ✔️ LED Art Displays ✔️ Stage & Event Lighting ✔️ Holiday & Architectural Lighting ✔️ Gaming & Interactive Installations The OctoWS2811 adaptor features a 74HCT245 buffer chip and 100 ohm impedance matching resistors. CAT6 Ethernet cable is used from this board to the LED strips. CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high-quality signal. The RJ-45 network jacks allow your LED array to be easily disconnected from the electronics. Teensy 3.x and 4.0 microcontrollers are added on top of the adaptor using stacking header pins, or a header and socket pair if you wish to be able to remove the Teensy board. This adaptor can also be used with the larger Teensy 3.5, 3.6, and 4.1 boards using double insulator pins and sockets. Together, these are tall enough to allow the longer board with an SD socket to overhang the RJ-45 connectors. Note: A Teensy 4.0 or Teensy 4.1 Development Board is needed to make your Teensy OctoWS2811 Adapter operational. The TEENSY Microcontrollers are not included, and are shown in the photos for illustration purposes only.  Teensy OctoWS2811 Resources: PJRC forum for Teensy Users PJRC OctoWS2811 Product Page