TaylorMade Qi4D Custom Driver

EMI0598 TaylorMade Qi4D Custom Driver Qi4D drivers utilize refined shaping, multimaterial construction, a faster face with a new and improved roll radius, and four moveable Trajectory Adjustment System (TAS) weights to provide you with the perfect blend of speed and forgiveness off the tee. Qi4D Driver BALL SPEED: Fastest SPIN: Mid-Low LAUNCH: Mid-High ADJUSTABILITY: 4 TAS Weights HEAD SHAPE & SIZE: Modern/460cc HAND & LOFT: RH- 8°,9°,10.5°,12° | LH- 9°,10.5°12° TECHNOLOGY SHAPED FOR SPEED Countless simulations and feedback from the best players in the world resulted in the all-new shape of the Qi4D driver. The head has been reengineered with cutting-edge aerodynamic properties designed to reduce drag and increase ball speed. The shape provides the ideal blend of forgiveness and speed to help you swing faster and hit the ball farther. ENGINEERED FOR DISTANCE AND FORGIVENESS The Qi4D features a new and improved roll radius that tightens spin rates at different vertical contact points on the face. The result is more consistency between drives struck both high and low on the face. Additionally, 60x Carbon Twist Face™ helps shots struck out of the heel and toe stay more online for narrower downrange dispersion. The carbon face also provides weight savings which adds to the ball speed equation. OPTIMIZED ADJUSTABILITY The Qi4D driver features four moveable Trajectory Adjustment System (TAS) weights (9g x2 / 4g x2) that provide you the most mass efficient adjustability for optimized ball flight and spin. A 4° loft sleeve adds another level of adjustability for loft, lie and face angle to optimize ball flight. If you’re looking for the most accurate head data, you can upgrade to an LME head with reflective fitting markers compatible with GC Quad launch monitors. FRONT: FOR ENHANCED DISTANCE Experience less spin and enhanced distance with both heavy weights in the front. BACK: FOR ENHANCED FORGIVENESS Experience enhanced forgiveness and tighter dispersion with both heavy weights in the back. FADE: FOR SLIGHT FADE BIAS Experience slight fade bias with both heavy weights in the toe. DRAW: FOR SLIGHT DRAW BIAS Experience slight draw bias with both heavy weights in the heel. A SHAFT FOR EVERY SWING Through capturing and analyzing more than 11 million shots over the last 20 years, we’ve developed technology that allows fitters and everyday golfers just like you to identify your rotation through impact and play a shaft that matches your unique swing profile. Our research shows most players fit into one of three rotation rate groups: high, mid, or low. REAX™ shafts are the result of TaylorMade engineers utilizing Mitsubishi Chemical’s industry leading materials expertise and production processes to produce world-class shafts for a vast array of swing types. TOUR-PROVEN TECHNOLOGIES Qi4D drivers employ time-tested and Tour-proven technologies A redesigned cut-through Speed Pocket™ reduces spin and protects ball speeds on low-face strikes for consistent performance, even on mis-hits. Multimaterial construction allows engineers to strategically place mass in areas of the club where it maximizes speed, stability and overall performance. GALLERY TaylorMade Qi4D Custom Driver Product Specs Loft Lie Volume Length Swing Weight Availability 8° 56° - 60° 460cc 45.75" D4 RH 9° 56° - 60° 460cc 45.75" D4 RH/LH 10.5° 56° - 60° 460cc 45.75" D4 RH/LH 12° 56° - 60° 460cc 45.75" D4 RH/LH Note: This is for your reference only and does not denote the content of the product. Shaft Specs MITSUBISHI REAX 50 HIGH ROTATION RED - SHAFT Rotation Flex Weight Torque High X 59g 4.1° High S 59g 4.6° High R 57g 4.7° High A 51g 5.5° MITSUBISHI REAX 50 MID ROTATION BLUE - SHAFT Rotation Flex Weight Torque Mid X 56g 4.4° Mid S 53g 4.4° Mid R 52g 4.6° MITSUBISHI REAX 60 LOW ROTATION WHITE - SHAFT Rotation Flex Weight Torque Low X 65g 3.5° Low S 65g 3.9° Low R 65g 4.2° Grip Specs GOLF PRIDE ZGRIP PLUS2 - GRIP Color Size Weight Round/Reminder Butt Size Black/Silver Standard 52g Round .600 TaylorMade Qi4D Custom Driver Shafts Accra Accra TZ takes all the best attributes of the past Tour Z models and incorporates the latest high modulus materials to create a smoother “feel” than ever before while maintaining the low launch/low spin characteristics that the Tour Z brand has been known for.   Model Flex Weight (g) Torque Kick Point Accra TZ5 65 S, X 61, 62 3.5, 3.5 - Accra TZ5 75 S, X 70, 71 3.2, 3.2 - Accra TZ6 65 S, X 56, 58 2.5, 2.5 - Accra TZ6 75 S, X 71, 72 2.3, 2.3 - Aldila Aldila Ascent take our FlyDrive™ Technology and integrate it into high performance ultralight hybrids that are designed to compliment the look, feel and performance of the all new ASCENT™ Ultralight Wood shafts.   Model Flex Weight (g) Torque Kick Point Aldila Ascent 45 L 44 5.0 - Aretera Aretera EC1 Blue Utilizes ultra premium exotic materials to the layup in critical areas and in strategic orientations promoting enhanced torsional stability with a seemingly effortless flowing transfer of power.   Model Flex Weight (g) Torque Kick Point Aretera EC1 Blue 55 R, S 58, 58 4.0, 3.8 - Aretera EC1 Blue 65 S, X 68, 69 3.6, 3.4 - Aretera EC1 Blue 75 S, X 78, 78 3.4, 3.2 - Fujikura Fujikura Air Speeder 50 '25    Fujikura Speeder MD developed to aid in reducing spin and maximizing stability without adding additional weight.   Fujikura Speeder NX TCS    Fujikura Ventus Black w/ Velocore+ enhanced with new VeloCore+ Technology and advanced material designs to offer players even greater performance results than their predecessors.   Fujikura Ventus Black w/ Velocore Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel   Fujikura Ventus Blue '25    Fujikura Ventus Blue w/ Velocore+ designed for ultimate clubhead stabilization and promotes consistent center-face contact, tightening dispersion and increasing control of the club throughout the swing.   Fujikura Ventus Blue w/ Velocore+ is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in a straight taper, ultra tip-stiff profile.   Fujikura Ventus Red w/ Velocore+ Featuring a re-engineered multi-material bias core, VELOCORE+ enhances the feel and performance of VENTUS with an additional premium bias core material, promoting even tighter dispersion and increased ball speeds.   Fujikura Ventus Red w/ Velocore promotes consistent center-face impact and provides ultimate stability, tightening dispersion and increasing control.   Fujikura Ventus TR Black w/ Velocore Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel.   Fujikura Ventus TR Blue w/ Velocore designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.   Fujikura Ventus TR Red The softest tip section of the TR lineup is ideal for players seeking a mid-high launch profile with controlled spin and increased stability.   Fujikura Ventus TR Red w/ Velocore Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.   Fujikura Ventus Velocore+ White Lightweight configuration offering golfers increased launch and spin without compromising the signature consistency and stability that VENTUS is known for.   Model Flex Weight (g) Torque Kick Point Fujikura Speeder MD 6 S, X 58, 62 4.4, 4.3 - Fujikura Speeder NX TCS A, R, S 52, 53, 55 3.6, 3.6, 3.6 - Fujikura Ventus Black w/ Velocore+ 6 S, X 66, 66.5 3.2, 3.0 High, High Fujikura Ventus Black w/ Velocore+ 7 S, X 75, 75.5 3.0, 2.9 High, High Fujikura Ventus Black w/ Velocore 6 S, X 64, 65 3.4, 3.1 - Fujikura Ventus Black w/ Velocore 7 S, X 77, 78 3.1, 2.8 - Fujikura Ventus Blue w/ Velocore+ 5 R, S 58.5, 58.5 3.7, 3.5 - Fujikura Ventus Blue w/ Velocore+ 6 R, S 65, 65.5 3.4, 3.3 - Fujikura Ventus Blue w/ Velocore+ 7 S, X 75.5, 76 3.0, 2.9 - Fujikura Ventus Blue w/ Velocore+ 8 S, X 84.5, 85 2.9, 2.8 - Fujikura Ventus Blue w/ Velocore 5 R 58.5 3.7 - Fujikura Ventus Blue w/ Velocore 6 S, X 65, 65 3.1, 3.1 - Fujikura Ventus Blue w/ Velocore 7 S, X 76, 77.5 3.0, 2.9 - Fujikura Ventus Red w/ Velocore+ 5 R2, R, S 59, 59.5, 59.5 3.8, 3.6, 3.4 Low, Low, Low Fujikura Ventus Red w/ Velocore+ 6 R, S 67, 67.5 3.4, 3.3 Low, Low Fujikura Ventus Red w/ Velocore 5 R 58.5 3.7 - Fujikura Ventus Red w/ Velocore 6 S, X 65, 66 3.2, 3.1 - Fujikura Ventus Red w/ Velocore 7 S, X 71, 72 3.1, 3.1 - Fujikura Ventus TR Black w/ Velocore 6 S, X 69.5, 70 3.1, 2.9 - Fujikura Ventus TR Black w/ Velocore 7 S, X 79.5, 80 2.8, 2.7 - Fujikura Ventus TR Blue w/ Velocore 5 R, S 58, 58 3.5, 3.3 - Fujikura Ventus TR Blue w/ Velocore 6 S, X 68, 68 3..1, 2.9 - Fujikura Ventus TR Blue w/ Velocore 7 S, X 77.5, 78.5 2.9, 2.7 - Fujikura Ventus TR Blue w/ Velocore 8 S, X 86.5, 88.5 2.8, 2.6 - Fujikura Ventus TR Red w/ Velocore 6 S, X 68, 69.5 3.2, 3.0 - Fujikura Ventus TR Red w/ Velocore 7 S, X 77, 78 3.0, 2.8 - Fujikura Ventus Velocore+ White 4 R, S 49.5, 49.5 5.0, 5.0 High, High Graphite Design GD Tour AD CQ features the new Nitta 2G-Namd carbon-fiber material technology in the butt section of the shaft and has a bend profile of firm in the handle section, firm in the center section and a medium+ tip section to promote mid-high launch angles and mid ball spin rates.   GD Tour AD DI  is designed to provide more power and stability. This unique technology allows the player to create an epic IMPACT on ball speed while still providing exceptional feel and control.   GD Tour AD FI adapts to your swing, delivering unparalleled stability and responsiveness. Elevate your game with a shaft that thinks as fast as you play - because intelligent performance starts with the new Tour AD Flight Intelligence golf shaft from Graphite Design   GD Tour AD GC Designed and manufactured in Japan, these wood shafts are pearl white with bronze and orange accents, finished with a gloss clear coat. The Tour AD GC features a stiff butt section, firm center, and firm+ tip, promoting mid launch angles and low/mid to mid ball spin rates.   GD Tour AD IZ has a firm stiffness starting at the handle, and medium center section and a firm+ tip profile to promote High Launch angles with Low/Mid ball spin rates.   GD Tour AD VF shaft profile is Firm in the butt section, Stiff+ in the center section and has a Very Stiff tip to promote Low/Mid launch angles and Low-ball spin rates.   GD Tour AD XC series is a new shaft that maximizes the distance-pursuit typeface structure that is currently the mainstream of wood.   Model Flex Weight (g) Torque Kick Point GD Tour AD CQ 5 R1, S 53, 56 4.6, 4.5 Low/Mid, Low/Mid GD Tour AD CQ 6 S, X 62, 66 3.4, 3.4 Low/Mid, Low/Mid GD Tour AD CQ 7 S, X 73, 74 3.2, 3.2 Low/Mid, Low/Mid GD Tour AD DI 6 S, X 65, 67 3.3, 3.3 High, High GD Tour AD DI 7 S, X 74, 75 3.2, 3.1 Mid/High, Mid/High GD Tour AD FI-6 S. X 66.5, 68 3.2, 3.2 Mid, Mid GD Tour AD FI-7 S. X 75.5, 78 2.9, 2.9 Mid, Mid GD Tour AD GC-6 SR, S, X 61.5, 62, 65.5 3.1, 3.1, 3.1 Mid, Mid, Mid GD Tour AD IZ 5 R1, S 54, 56 4.5, 4.4 Mid, Mid GD Tour AD IZ 6 S, X 63, 65 3.2, 3.2 Mid, Mid GD Tour AD IZ 7 S, X 72, 74 3.1, 3.1 Mid, Mid GD Tour AD VF 6 S, X 66, 67 3.3, 3.3 - GD Tour AD VF 7 S, X 74, 75.5 3.0, 3.0 - GD Tour AD VF 8 X 85 2.8 Mid/High GD Tour AD XC 6 S, X 64, 65 3.2, 3.2 Mid-High, Mid-High GD Tour AD XC 7 S, X 73, 75 3.0, 3.0 Mid-High, Mid-