Table Leaf Forks

Brass Table Keepers Sturdy Brass Table Leaf Forks are a great stabilizer that holds two table-top-sections firmly together. Also the sturdy joint provides a leveling action for the two adjoining sections. Use one assembly on each side of table. Mount on under side of top. This unique assembly is also referred to as: table yokes, table keepers and table clamps. Call them what you want. They are any easy to use option for joining table tops. Table Leaf Forks Fork Size Overall Width: 2-7/8" Center to center: 2-3/8" Finger Pull Depth: 5/8" Depth: 2" Tine Width: 7/16" x 3/32" Thick Sleeve Size Width: 1-1/4" Thickness: 3/8" Depth: 1" Level and securely hold two table sections together Replacing old table forks: Please measure carefully, as not all previously made table keepers are this exact size. Each table fork assembly is made from strong brass extrusions. This brass assembly is unfinished. Sleeves are spring loaded for a tight, secure fit. Care should be used when measuring as not all previously made table clamps were the exact same size. Make table mobile and functional by adding furniture casters. Install Brass Table Keepers Use two table fork assemblies when joining two table sections together. The two forks will be used opposite each other on under side of table top. Mark install location of sleeves with yokes on underside to table sections. Once installed, table yokes should equally straddle joint between the two table sections, when they are together.  Finger-pull portion of fork should be slightly inset from outer edge of table top. Pre-drill pilot holes. Also it is best to screw a steel-screw into each hole, before actually inserting brass screws. Once sleeves are installed: slide Fork into sleeves. It will help level table surface and hold sections tightly together.