Husqvarna T540i XP 12" Top Handle Chainsaw 967863712 | Tool Only | New

Husqvarna T540i XP 12 in Battery Top Handle Chainsaw | Part # 967863712 | TOOL ONLY | NewThe Husqvarna T540i XP is a professional battery top-handle chainsaw built for arborists working in the tree, where weight, balance and noise decide the day. Husqvarna rates it as equivalent to a 40cc petrol saw when paired with a high-capacity battery, at 5.51 lbs before battery and cutting equipment. This part number is the bare tool for climbers who already run Husqvarna BLi-X batteries. ⚠ TOOL ONLY - BATTERY AND CHARGER NOT INCLUDED Husqvarna lists part number 967863712 as the T540i XP (tool only) configuration. Battery and charger are not included. The battery-and-charger kit version of this saw is sold under a different Husqvarna part number, 967863702, which is not what this listing supplies. You must already own or separately purchase a Husqvarna BLi-X 36 V battery and a compatible charger. ⚠ BATTERY PLATFORM - CONFIRM BEFORE YOU BUY Husqvarna publishes this machine at a nominal 40 V on its US product page while listing the battery platform as the Husqvarna BLi-X 36 V system. Both figures describe the same platform. It runs BLi-X 36 V packs only. It is not compatible with Husqvarna's 40-B series consumer packs unless Husqvarna lists that pack as BLi-X 36 V, and it is not compatible with any other brand's 36 V, 40 V, 80 V or 82 V battery. ⚠ BAR AND CHAIN FITMENT This saw is supplied in the 12 in bar configuration. Husqvarna publishes a recommended bar length range of 12 in to 16 in for this model, with .325 in mini pitch and SP21G chain. Husqvarna does not publish a chain gauge figure on the pages consulted for this listing, so no gauge is stated here. Do not assume any other bar length, pitch, gauge or mount pattern will fit. Verify replacement bar and chain part numbers against the Husqvarna parts list for the T540i XP before ordering.Specifications Part #: 967863712 Also Known As: 967 86 37-12 Brand: Husqvarna Model: T540i XP (tool only) Condition: New Configuration: Tool only (no battery, no charger) Handle type: Top handle, arborist Voltage: 40 V nominal as published by Husqvarna Battery platform: Husqvarna BLi-X 36 V Battery chemistry: Li-Ion Output shaft power: 2.8 hp Chain speed at max power: 79 ft/s Bar length: 12 in (30 cm) Recommended bar length range: 12 in to 16 in Chain type: SP21G Pitch: .325 in mini Weight excluding battery and cutting equipment: 5.51 lbs Sound pressure at operator ear: 92 dB(A) Sound power level, guaranteed: 103 dB(A) Vibration, front handle: 2.1 m/s² Vibration, rear handle: 3.4 m/s² Warranty: Husqvarna two-year commercial warranty applies to 500-series handheld products Key Features 2.8 hp output shaft power. Husqvarna describes the T540i XP as equivalent to a 40cc petrol saw when run on a high-capacity battery, which is real removal power for a top handle. 79 ft/s chain speed. High chain speed at maximum power for fast, clean cuts on live limbs. 5.51 lbs bare. Light in the hand on a rope, which is the whole argument for a top-handle saw. 92 dB(A) at the operator. Quiet enough to hold a conversation with the ground crew, a genuine safety advantage over a two-stroke top handle. Low vibration, 2.1 and 3.4 m/s². Front and rear handle readings that help with daily hand-arm vibration exposure limits. Instant start, no fuel in the tree. No priming, no choke, no hot exhaust and no fuel spill risk while aloft. CompatibilityThe T540i XP runs on Husqvarna BLi-X 36 V professional batteries only. Husqvarna publishes the machine voltage as 40 V nominal on that same platform. No compatibility with any other brand or voltage family is claimed or implied. For cutting equipment, only the bar length range, pitch and chain type Husqvarna publishes for this model are stated above. Please verify your battery model, charger and any replacement bar or chain against your machine's model and serial number before ordering. Why Buy OEM?A genuine Husqvarna T540i XP is built and tested to factory specification, with the correct chain brake, battery interface, motor control electronics and oiling system. On a top-handle saw used at height, none of those are places to accept an unverified rebuild. This is the factory unit, supported by the Husqvarna dealer network. ✔ Why Buy From Us ✔ Genuine Husqvarna OEM top handle chainsaw, brand new in the box ✔ Part number 967863712 confirmed as the TOOL ONLY version, kit is 967863702 ✔ TOOL ONLY status flagged in the title, the header and a warning block ✔ Bar and chain data published exactly as Husqvarna lists it, gauge omitted rather than guessed ✔ Professional BLi-X 36 V platform shared across the Husqvarna pro range ✔ Fast Shipping - Ships Quickly from the USA Keywords967863712, Husqvarna T540i XP, T540i XP tool only, top handle battery chainsaw, arborist cordless saw, Husqvarna BLi-X 36V chainsaw, SP21G chain, .325 mini pitch, 12 inch battery chainsaw, Husqvarna T540i XP bare tool, professional climbing saw, 40V Husqvarna saw Please verify compatibility before purchase. This listing is the tool only under part number 967863712. Battery and charger are sold separately and are not included at this price; the kit version is Husqvarna part number 967863702. Confirm your Husqvarna BLi-X 36 V battery and charger, and confirm any replacement bar or chain, against your machine's model and serial number and the Husqvarna parts list for the T540i XP before ordering.