Blank Electric Guitar Kit, Mahogany Body, Rosewood Fretboard, Two Single-Coils

Build a classic tone machine from the ground up with this blank TE-style guitar kit. Designed for makers who want full shaping, finishing, and tonal control, this slab-body kit arrives unfinished and ready for carving, sanding, routing, and personal customization. The maple neck paired with a rosewood fretboard delivers familiar snap and warmth, while the blank headstock gives you freedom to design your own signature shape. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) Blank headstock ships undrilled and unshaped, so you cut the outline and drill the tuner holes yourself Flat body is straightforward to sand and finish evenly Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Maple Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 25.5″ Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic Headstock Shape: Standard (as in product images) Binding: None Nut: White Plastic Electronics Neck Pickup: Single Coil Bridge Pickup: TE-Style Controls: 1 Volume, 1 Tone, 3-Way Selector Wiring: DIY (soldering required) Wiring Diagram: 2x Single Coil, 1 Volume, 1 Tone, 3-Way Selector Output Jack: Not pre-drilled (builder drills to suit the body shape) Hardware Bridge: T-style Tuners: Sealed, Non-locking, 6-in-line Pickguard: Black Knobs: Chrome Cavity Covers: None Strings: Steel Finish: Chrome What's in the Box Mahogany body blank, uncut, routed for the pickguard, control cavity and bridge Neck with dark fretboard, frets and dot inlays 6x tuners with bushings and washers Black pickguard with neck pickup fitted Black bridge plate with bridge pickup and six saddles Chrome neck plate with four neck screws Chrome control plate wired with two knobs, selector switch and output jack Square chrome jack plate with output jack fitted 2x Allen wrenches Assorted mounting screws Coiled set of strings with string trees Guitar cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.