sysWORXX CTR-710 Controller

Efficient Pre-Assembly Controller Our sysWORXX CTR-710 is a freely programmable Linux compact controller that enables easy exchange of field devices. It is fully compatible with the sysWORXX CTR-700 and features Molex Micro Clasp connectors for quick-release connection of all local inputs and outputs. The removable connectors allow efficient pre-assembly of the connection cables. The CTR-710 is also programmable as PLC in IEC 61131-3 with the programming environment OpenPCS. It is ready for use with all common cloud providers through standard protocols such as MQTT and REST. This module is particularly suitable for the use of pre-assembled cable harnesses and installation by untrained personnel, making it possible to manage a complete exchange of your devices on site in the shortest possible time. Node-RED, a low-code environment, is immediately usable for easy entry, even for non-informaticians.  Features Tech Specs Documents Downloads Molex Micro Clasp Connectors, 2mm Pitch Independent Ethernet interfaces for secure separation of enterprise IT and store floor OT Various protocols CAN, CANopen Modbus RTU and TCP MQTT Shielded backplane extension bus Suitable for DIN-rail mounting WLAN connection via external antenna Value The information herein is subject to change without notice. Physical 60 x 162 x 91 mm 0ºC … +55ºC 10 … 95% non-condensing (VDE 0110) CPU: NXP i.MX7 Dual Cortex-A7 1000 3800 Yes Yes, CPU sensor and IO board Memory: 1024 MB 8GB eMMC Software: Basic installation Linux (Debian), I/O driver, Node-RED incl. sysWORXX nodes for on-board IOs Additional licenses IEC 61131-3 Runtime: OpenPCS (incl. CAN, CANopen, Modbus TCP/RTU, MQTT) Optional Third party software: Download via Debian OS repositories qBee Agent for Device Management via Cloud OpenPCS RT, OPC UA server for OpenPCS Third Party Software; downloadable via Debian OS repositories Connectivity: 2 (each with its own MAC address) 2 (CANopen, CAN layer 2) 3 (RS485, RS232) 1 1 Serial  (via USB) Prepared for use with cloud providers such as IBM Watson I/O Interfaces Digital inputs: 16  2 (alternate functions – depending on used A/B-Encoder) 2 (alternate functions – depending on used High-speed Counter) A/B Encoder: 1  Highspeed Counter: 1 Digital outputs: 16 Analog: 4 Relay: 2 PWM: 2 Controls Run/Stop; Config, Reset, Boot Power CPU; Power Periphery, Run, Error, extras SFTP/SSH System Manual System Manual sysWORXX CTR-710 Datasheet Datasheet CTR-710 Brochure Brochure sysWORXX CTR-710 Download OpenPCS IEC 61131-3 programming system Version V7.1.2 RV1.00 Download SYS TEC electronic - specific extension for OpenPCS / IEC 61131-3 Version 7.4.3 RV1.00