sysWORXX CTR-500 Controller

The smart gateway solution The sysWORXX CTR-500 is a freely programmable Linux module for industrial applications. It is used as fieldbus gateway, edge controller and compact controller. It is a member of our sysWORXX Controller family. Fast, compact and powerful like its big brother, the CTR-700, it supports easy application development with the low-code environment Node-RED in a very short time. The CTR-500 can also be programmed as a PLC in IEC 61131-3 using the OpenPCS programming environment. Features Tech Specs Documents Downloads Application Scenarios Collection, consolidation and analysis of data points from system to be monitored Condition Monitoring (permanent status monitoring) Energy Management (Smart Building, Smart Industry) Predictive Maintenance Integration into Mesh net Narrowband functionality (from 2018) CTR-500 speaks the language of your employees The special feature of the sysWORXX CTR-500 is the software. It can be programmed via IEC 61131-3 as well as in various IoT languages (C#/.Net, Node-RED, Java, Python). Thus it is not necessary to require an expensive external service. The controller speaks the language of the employees. Programming Languages IoT Languages C#/.Net Node-RED Java Python Further Languages/Interfaces/Protocols MQTT OPC UA OpenPCS C/C++ SD CANopen Modbus TCP/IP Benefits Support of modern high-level languages Simultaneous execution of IEC 61131-3 PLC programs and other Linux applications Two independent EthernetInterfaces allow strict and secure separation of Enterprise IT and Shop floor OT Use of higherlayer protocols as CANopen (incl. CANopen-Manager-Service an easy integration of other CANopen modules) Support of communication and data exchange with other devices via Modbus protocols by extended Modbus/TCP function blocks Backplane expansion bus, shielded between the module underside and the DIN rail Suitable for DIN rail mounting     Property Value The information herein is subject to change without notice. Physical Size (height x width x depth): 60 x 108 x 91 mm Operating Temperature: 0ºC … +55ºC Humidity: 10 … 95% non-condensing (VDE 0110) CPU: Processor: NXP i.MX7 Processor Core: Dual Cortex-A7 MPU speed (MHz): 1000 MIPS: 3800 RTC: Yes Temp-Sensor: Yes Memory: RAM: 1024 MB Storage: 8GB eMMC Software: Basic Installation: Linux OS (Debian Linux, Jessie 8.10), I/O Drivers, Node-RED with nodes for I/O drivers, OpenJDK & Mono Additional Licenses: OpenPCS RT, OPC UA server for OpenPCS Optional: Third Party Software; downloadable via Debian OS repositories Connectivity: ETH: 2 (each with its own MAC address) CAN: 2 (CANopen, CAN layer 2) SIO: 2 (RS485, RS232) USB Host: 1 SD Card: 1 Linux Console: 1 (Version as USB or RS232) Cloud: Prepared for use with cloud providers such as IBM Watson I/O Interfaces DI 24V: 16 (data galvanically decoupled) A/B Encoder 2 (alternate functions – depending on used A/B-Encoder) High-speed Counter 2 (alternate functions – depending on used High-speed Counter) DO 24 VDC, 0.5A 16 PWM 2 (alternate functions – depending on used PWM channel) Relais 230 VAC, 1 A 2 AIn 4 (configurable: 0 … 10VDC, 0 … 20 mA / 4 … 20 mA Controls Switches: Run/Stop; Config, Reset, Boot Status LEDs Power CPU; Power Periphery, Run, Error, extras Service Access SFTP/SSH System Manual System Manual sysWORXX CTR-700 Datasheet Datasheet CTR-700 Brochure Brochure sysWORXX CTR-700 Download OpenPCS IEC 61131-3 programming system< Version V7.1.2 RV1.00 Download SYS TEC electronic - specific extension for OpenPCS / IEC 61131-3 Version 7.1.2 RV1.00