sysWORXX CANopen I/O-X2

The CANopen IO-X2 is a very compact and cost effective CANopen IO module featuring a high-density of industrial proven I/O's. The module includes a CPU-core including the pre-programmed firmware for CANopen communication and peripherals for the industrial inputs and outputs. Extensive diagnostic routines are implemented to ensure a most reliable and safe operation. All inputs and outputs as well as configuration parameters are accessible via the CANopen protocol. The CANopen IO-X2 is a CANopen slave device according CANopen device profile CiA 401 V2.1 and CANopen communication profile CiA 301 V4.02. Two LED indicate the device state according to CiA 303-3 V1.0. Features Tech Specs Documents Downloads CANopen features: Communication profile according to CiA 301 V4.02 Device profile according to CiA 401 V2.1 State indicators according to CiA 303-3 V1.0 Layer Setting Service (LSS) according to CiA 305 V1.1 2 TPDO Dynamic PDO-Linking and Mapping SDO-Server Life guarding, Node guarding, Heartbeat Producer Emergency Producer Minimum Boot-up capability (Slave) Minimum NMT boot-up master (Manufacturer extension) Communication and device configuration: Galvanic decoupled CAN-bus driver supports up to 110 CAN-nodes on one bus Jumper for CAN-bus termination 120 Ohm Hex-encoding switches for setting node–ID and baud rate CAN-bus bitrate: 10kBit/s to 1Mbit/s High-quality connectors: (included in scope of delivery) Power-Supply: 2-pin plug connector CAN-bus: 5-pin plug connector I/O: single 30-pin plug connector, lockable Non-volatile memory for storage of configuration data Internal monitoring and diagnostics of: onboard temperature, power supply, memory and other controller internals Emergency Messages sent out in case of failure IO configuration and module features 24 digital inputs 24VDC, galvanic isolated in groups of 4 inputs CANopen device according to CiA 401 V2.1 24 LEDs for I/O state indication Galvanic isolated CAN-bus interface Non-volatile storage of configuration data Watchdog CAN bus termination (120 Ohm resistor) via Jumper Power Supply, Environmental Conditions: Operating voltage: 24V ±20% Current consumption: <70mA Operating temperature: -20°C to +70°C Storage temperature: -20°C to +90°C Dimensions (LxWxH in mm): 95x70x58 Installation method: DIN-rail mounting Enclosure protection class: IP20 Weight: ca. 130g User Manual sysWORXX CANopen I/O modules - User Manual Product Flyer sysWORXX CANopen I/O modules - Flyer Product Data Sheet sysWORXX CANopen IO-X1 - Fact sheet EDS files - sysWORXX CANopen I/O modules P/N SO-1064 - Package includes the "Electronic Data Sheet" (EDS) for all sysWORXX CANopen I/O modules