SymCom PumpSaver 231 INSIDER-P | Pump Protection

PumpSaver 231 INSIDER-P Pump Protection SymCom’s Model 231-Insider-P single-phase PumpSaver Plus fits inside ¹⁄?, ½, ¾, and 1hp 230V control boxes and is designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid-cycle, overvoltage, and undervoltage condi­tions.             Manufacturer: SymCom Model: 231INSIDER-P Product Information: SymCom’s Model 231-Insider-P single-phase PumpSaver Plus fits inside ¹⁄?, ½, ¾, and 1hp 230V control boxes and is designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid-cycle, overvoltage, and undervoltage condi­tions. A calibration adjustment allows the Insider-P to be calibrated to specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing algorithm constantly monitors the incoming power for fluctuations. When an abnormality, such as a loss of load is detected, the PumpSaver Plus deactivates its output relay directly disconnecting the pump motor. The PumpSaver Plus then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts down to zero or power is removed and reapplied, the PumpSaver Plus reacti­vates its output relay, allowing the pump to turn back on. The 231-Insider-P communicates with a hand-held diagnostics tool called the Informer (sold separately). The Informer displays 15 parameters including calibration points, trip points, running points, and last faults. An IR Kit-12 (12” fiber optic kit) is in­cluded with each 231-Insider-P, allowing the Informer to access these parameters even when the 231-Insider-P is enclosed in a control box. This is valuable for troubleshooting the pump while it is running. The PumpSaver Plus Model 231-INSIDER-P fits inside 1/3 – 1hp, 230V Franklin, Pentek, or CentriPro control boxes. PumpSavers are designed to protect single-phase pumps from dry-well, dead-head, rapid-cycling, jammed impeller, and over/undervoltage conditions. Typical applications include residential water wells, commercial water wells, irrigation wells, and golf course and other sprinkler systems. Application: Submersible pump with a quick disconnect style control box Protects From: Dry well (run dry condition) Flow restrictions (dead head) Over current (jammed impeller) Over voltage Under voltage Features: Fits inside a 3 wire quick disconnect style control box Can be calibrated to specific pump / motor combina­tions and various conditions Will work with destaged pump models ending in 05R Infrared LED communication with the INFORMER makes diagnostics simple Quick and easy installation – less than 30 seconds “Run Light” indicates the unit is functioning “Run Light” and “Cal. Light” used as diagnostic indicators  Restart delay can be set up to 225 minutes or placed in manual reset mode For selection charts and additional information use this link: PumpSaver 231 Insider-P Brochure