SXP118 Compact, high-performance 1x 18" powered subwoofer, Black

The SXP118 is an active subwoofer. It is a great option for those looking for a portable option for  medium sized live events. From The Manufacturer: The SXP118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE! full-range system to 40Hz — providing exceptional low frequency impact and increasing headroom. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure. The design of the 18” driver maximizes output while minimizing power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. With a maximum SPL capability of 135dB peak at 1 meter, the SXP118 is the ideal subwoofer for theater and portable live sound applications, as well as premium installations that require the maximum output from a compact enclosure. Features: Compact, self-powered subwoofer 1 x 18” (460mm) driver with 4” (100mm) voice coil Onboard Class D amplification and DSP Dante™ Digital Audio networking Global mains operation with Power Factor Correction Tour-grade plywood enclosure with flying inserts IP24 rating option with rain cowl Applications: Live sound reinforcement Theater sound Corporate AV events Fixed installations in concert halls, ballrooms and HoW Bars and clubs Outdoor restaurant, bar and hotel entertainment areas Concourses and Theme Parks Specifications: Type Compact, direct radiating powered subwoofer Frequency Response 47Hz – 150Hz ±3dB, -10dB @ 41Hz Driver 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone Input Sensitivity 20dBu for 100dB SPL (CDD12/15 pre-set) -13dBu for 100dB SPL (CDD8 pre-set) Maximum SPL 132dB continuous / 135dB peak Dispersion Omnidirectional / or Cardioid (paired) Crossover Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired) Connectors  Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon Analogue Input Impedance 20 kΩ balanced to ground Maximum Analogue Input Level 24.6 Vpp (+21dBu), over voltage protected Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct LPF Up to 200ms input delay Pre-set selection via rear panel switch Type  2 channel switch-mode, class D, Bridged Tied Peak Output Power 2000W total Average Efficiency 89% Cooling External fan Maximum Ambient Temperature 40°C (104°F) for full output Power Supply Type Switch mode, fixed frequency with PFC AC Input Operating Range 85 – 265V ~ AC, 50 - 60Hz Power Factor > 0.98 Nominal Power Consumption 550W Mains Connector Neutrik® Powercon True1 Enclosure Extensively braced multi-laminate plywood. Finish  Durable Polyurea Coating Protective Grille Black perforated Zintec Fittings Two skids on base, with mating channels on top 16 x M8 inserts for optional castors M20 top-mounted thread plate for pole mounting 16 x M10 mounting points 2x Bar handles, 1 on each side 4x fittings for optional transit cover IP Rating IP24 Dimensions (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors) (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors) Weight 46.5kg (103lbs) w/o castors  50kg (110lbs) with castors Contents: Network Connectors 2 x Neutrik® Ethercon Network Protocol TCP/IP and UDP/IP