SWM15-HHS | Single-Button Handheld Microphone for SWM15 & SWM16 Series Wireless Microphone Systems

The Sound Town SWM15-HHS is a high quality handheld microphone fully compatible with the Sound Town SWM15-PRO, SWM16-KM and SWM16-PRO series wireless microphone receiver systems. The two wireless microphones employ a cardioid pickup pattern which yields superb sound feedback and isolates noises in the background. Built-in audio compressing-expanding technology boosts dynamic range and delivers reliable, warm and smooth sound to your audience. This microphone is built to last and fully backed by a one year warranty, plus satisfaction guarantee. Whether used as a spare, a replacement, or an alternate option, this microphone does the job and will stand the test of time. Please note these replacement wireless handheld microphones are best used with Sound Town Wireless Microphone Systems. FEATURES Model Number: SWM15-HHS Compatible Systems: SWM15-PRO, SWM16-KM, SWM16-PRO Dynamic Handheld Microphone Cardioid Pickup Pattern Frequency Range: UHF 530-580 MHz Frequency Width: 32 MHz Max. Deviation Range: 45KHz Oscillation mode: PLL phase locked frequency synthesis Frequency Response: 40Hz-15KHz Harmonic radiation: <-63dBm Weight: .90 lbs Battery: AA*2 (Not Included) New One Year Warranty SUPPORT If you are having trouble with your microphones, first we need to clarify which batch your microphone is. BATCH 3: Single Button Microphone --------------------------------------------------------------------- ▶ If you have a dual button microphone, while the microphone is turned on and while pressing the set & power button simultaneously, do not let go until one of the following happens:   BATCH 2: The CHA or CHB blinks repeatedly.    BATCH 1: The signal bar on the upper right corner of the microphone screen blinks repeatedly. BATCH 1: 1. To change your microphone to a different channel: Turn off the microphone. Press the set & power button simultaneously. The power of the microphone should turn on automatically and the channel will change to either Channel A or Channel B. You will need to pair your receiver to the new microphone channel, please refer to instructions #2. 2. To pair your receiver to the microphone: Turn off the receiver. While the microphone is turned ON, press the set & power button simultaneously. While the pairing signal on the microphone LED display is still flashing, turn on the receiver. The light on the receiver should show blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected. BATCH 2: 1. To pair your receiver to the microphone: Turn off the microphone and receiver. While the microphone is turned OFF, press the set & power button simultaneously. Do not let go until the pairing signal on the top-right of the microphone LED display begins to flash. While the pairing signal on the microphone LED display is still flashing, turn on the receiver. The light on the receiver should show blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected. BATCH 3: 1. To pair your receiver to the microphone: Turn off the microphone and receiver. While the microphone is turned OFF, long-press the power button on the microphone and do not let go. When the display on the microphone flashes “1d”, immediately quick-press the power button on the microphone and then immediately release the power button. The microphone’s pairing signal on the top-right corner of the LED display will begin to flash. While the pairing signal on the microphone LED display is still flashing, turn on the receiver. The light on the receiver should show: SWM15-PRO: Blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected. SWM16-PRO: The RF1/RF2 light on the receiver should show green once it is connected correctly.