Switch Pros 9100

**Installation Guide can be found HERE** The Switch Pros 9100 provides in-cab clutter reduction, less wires to route into the cab, and under-hood power management! All systems include:  100 User-selectable switch legends (not shown) Eight user-programmable switches Four 35A circuits and four 20A circuits Waterproof, Solid State 125A Power Module RGB Backlighting provides unlimited color options, using Color Picker on App Daisy Chain up to 3 Switch Panels to One Power Module to allow control of your 8 outputs from up to 3 locations on your vehicle Switches can be programmed for: On/Off or Momentary Ignition or Battery Input Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation Memory Function Master Mode, with ability to turn multiple outputs On AND Off with one touch Automatic Power-Up upon vehicle start up Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low) Lighting outputs can dim from 100% to 10%, with ability to dim during Flash or Strobe patterns Sleep Mode for minimal power consumption Color Coded circuit wires LED Input Status Indicators for easy troubleshooting Time Delay Off function available for all circuits Splash proof switch panel with Polycarbonate overlay faceplate Program and control the system from switch panel pad or smart phone Bluetooth interface with FREE Apple or Android App Battery Voltage Readout on App screen No Fuses or Bulky Relay box  Built-In Bluetooth Module Switch Panel Specs:                                                                                      RGB Backlighting provides unlimited color options, allows for exact matching to factory dash lighting Built-In Bezel Style Switch Panel enclosure measures 4” L x 2” W x .375” H ; includes concealed mounting hardware for factory-look installation Orange LED switch indicators 100 User Selectable Legends Power Module Specs: 8 Outputs: 4 rated @ 35A, 4 rated @ 20A 125A maximum rating Waterproof and Solid State 6”L x 3”W x .5”H (excluding connectors) LED Input Status Indicators for easy troubleshooting Underhood rated 125° to -40°C Kit Also Includes: 11’ of Communication Cable between Switch Panel and Power Module Color Coded Output wires Wire harness with Waterproof, sealed automotive grade connectors Power Cable with 125A inline fuse Switches can be programmed to be: On/Off or Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorize previous settings.  There is also a programming function to adjust the brightness of backlighting and indicator LEDs.