Final Finish Top Coat

A water-based, non-toxic finish for use over Milk Paint to protect against stains, dirt, and abrasion. Available in gloss, satin and matte finish. Introducing Final Finish Top Coat by Sweet Pickins Milk Paint--your ultimate solution for achieving a flawless finish and preserving the unique charm of your projects. This water-based top coat is specially designed to compliment milk paint, providing unparalleled protection against stains, dirt and abrasions. Available in three finishes-Gloss, Satin and Matte-it empowers you to tailor your creations with precision. Whether you're looking to maintain the chalky, flat look of your milk paint or to peresrve the natural essence of the wood without altering it's color, our Final Finish Top Coat is your ideal companion. Each pint covers an impressive 44 square feet, and a quart extends up to 88 square feet, delivering exceptional coverage. Final Finishes Top Coat enhances washability, ensuring your furniture and projects stand the test of time. Final Finishes Top Coat cleans up easily with soap and water,  Please shield this product from freezing temperatures.  For best results, apply above 55˚F and avoid humid conditions. We recommend that you test it on a smaller area before covering a larger surface with dark paint to avoid any unexpected outcomes. In rare cases, a slightly white or cloudy appearance may occur if applied too thickly or in humid conditions. Final Finish Top Coat is for interior use only and is formulated without formaldehyde preservatives, toxic mildewcides or fungicides. For those who embrace the chippy milk paint look, apply in thin coats; if any paint raises after the first coat dries, a light sanding and re-application of a second coat should do the trick! **Note: may not protect against certain kitchen oils.** Use over milk paint or stained/raw wood for a durable and abrasion resistant finish.  Our Top Coat Finish Finish is one of the highest quality, low toxicity water based finishes on the market and is a great alternative to solvent based products.  Can be used on cabinets, floors, doors, toys, etc. **Top Coat Final Finish will NOT even out the mottled, streaky appearance that milk paint is known for or change/deepen the color (for that, use an oil based finish such as our Oil Wax).  This product will seal the milk paint but keep the exact look of raw paint.** Directions: All surfaces must be clean and free from dirt, dust, grease, wax, oils and tsp/soap.  Allow 24 hours after painting/staining before applying.  Gently mix product or roll bottle to avoid air bubbles.  Pour product in a clean container to avoid contamination.  Apply in even thin layers with a brush or roller – keep a wet edge and avoid overbrushing.  Apply two coats allowing product to dry 4-6 hours between each coat.  Test product in an inconspicuous area when using over dark colors.  Avoid applying to heavily or product may appear cloudy or yellow.  These are general guidelines, user needs to determine what prep and application techniques are best for their specific surface. Clean up with soap and water.  Under normal conditions, Top Coat Final Finish will dry to the touch within 1 hour and is re-coatable in 4-6 hours.  Avoid traffic/use for at least 24 hours.  Product will continue to cure and harden over time.  Do not use below 55 degrees.  Do not allow product to freeze.  Keep bottle tightly closed and out of reach of children.  Always have adequate ventilation.  If you are chemically sensitive, always test for personal tolerance.