Supreme Bonder

Our PLA Supreme Bonder has been developed to truly provide an elasticity, unlike anything we’ve seen before. The bonder cures from the outside to the inside of the bond, rapidly curing the extension to the natural lash, without the effects of blooming (extensions turning white from shock curing). Our superbonder is perfect for a lash artist using any PLA adhesive. Fast Facts: 15 ml bottle Do not use on client's skin. Made and packaged for Paris Lash Academy in the UK Must be used at room temperature. Directions: Before use, make sure bonder is used at room temperature. Bonder will be viscous when cold and must be warmed to room temperature and mixed prior to use. After the lash extension has been applied, you need to wait 2-3 minutes, and then take a micro brush and apply a very small amount of bonder, only at the joint. Do NOT soak the lashes. And most important step: let the bonder set! Don’t rush to use a fan or nano mister immediately after applying. To simplify it: after you apply the last lashes, wait 2 mins for the extension to dry, then apply a small amount of bonder using a micro brush( do not have the micro brush soaking wet). After thoroughly brushing the bonder through the base of the extension, wait 2 more mins for the bonder to work ( do not use a fan or nano mister right away). Do not use in any other capacity. Liquid products, including adhesive, primers, bonders, and cream based products cannot be returned. Do you need a nano mister? If you use a bonder you DO NOT need a nano mister. If you use nano mister out of habit, use it AFTER the bonder, and make sure the bonder is fully dry and activated. NEVER put Supreme Bonder in your nano mister. Can I use it wrong? YES! If you use too much Supreme Bonder you may weaken the bond. Or if you have super high humidity (over 75%), your adhesive will cure quickly without a bonder, so applying Supreme Bonder would be similar to using too much product. MSDS Section 1 – Chemical Product and Company Identification MSDS NAME Supreme Bonder COMPANY ADDRESS 1285 Financial Blvd Reno, Nevada 89502 Adhesive cure aid Section 2 – Composition and Ingredient Information Ingredient Component Name Humectants(e.g Glycerine) 10% Emollients e,g, Peg-7 glyceryl cocoate) 5% Bulking agents (e.g. Sodium polyacrylate) 5% Additional ingredients (e,g vitamins, proteins, plant extracts 5% Emulsifying agents (e.g Ethylhexyl stearate) 5% Thickeners (e.g. Cellulose derivatives) 5% Preservatives, antimicrobials 1.5% Aqua Water to 100% Proprietary blend Ethanol containing solution Section 3 – Hazards Identification Hazard Risk Classification Category 2 for skin and eye irritation Potential Health Effect Eye: Causes eye irritation Skin: Causes skin irritation When used properly the product is safe and tolerable in accordance with the legal provisions (Article 3 of the EC Cosmetics Directive.) Section 4 – First Aid Measures Inhalation Not expected Eye Contact Inadvertent contact with eyes:rinse thoroughly with plenty of lukewarm water immediately;if irritation persists consult ophthalmologist as a precautionary measure Skin Contact Gently wash with mild soap and water. If irritation occurs, seek medical attention. If clothing is contaminated, remove and wash before reuse Ingestion Drink plenty of water. Seek medical attention. Inadvertent ingestion of larger amounts, do not induce vomiting. Rinse out of mouth and drink about one glass of water. Where appropriate, consult the poison control centre of the doctor. Section 5 – Fire Fighting Measures Specific Hazard N/A Flash Point N/A Hazardous Decomposition Materials NA Suitable Extinguishing Media All common extinguishing agents are suitable Protective Equipment NA Section 6 – Accidental Release Measures Personal Precautions (for non-emergency and emergency responders) Wear appropriate protective equipment. Stop leak if without risk. Environmental precautions Do not bring it into the eyes. Packaging should be recycled after residual emptying. Filled, unused packages must be disposed of separately in accordance with the waste management directives of the municipality Disposal and Clean Up In the event of spillage/leakage, mop up main volume with cloths;when larger amounts are involved, dispose of cloths and mopping up material by controlled disposal-risk of fire. Remove rest with plenty of water and common cleaning agent Section 7 – Handling and Storage Handling Precautions Avoid contact with eyes, skin, and clothing. Keep out of the reach of children Must be used in accordance with manufacturer’s instructions. Observe any warnings on packaging. Store in a cool and dry place (room temperature) Product may be flammable. Do not expose to extreme heat (e.g. sunlight). do not store close tonaked flames or sources of heat or use in direct vicinity. Section 8 – Exposure Controls and Personal Protection Exposure Limits No limit value which is to be controlled is defined Personal Protective Equipment Breathing protection N/A Not necessary Hand protection Body protection No special protective gloves necessary No special protective measures necessary Section 9 – Physical and Chemical Properties Physical State Colourless Odour Slight or characteristic pH 6.5-7.5 Boiling Point N/A Flash Point N/A Flammability Non-combustible Evaporation Rate N/A Ignition Temperature N/A Melting/Freezing Point N/A Solubility Water Soluble Vapour Density N/A Vapour Pressure Density N/A 0.97-1.01 g/ml Section 10 – Stability and Reactivity Reactivity Stable under normal conditions. Stability Excess heat, ignition sources, incompatible materials. Conditions to Avoid None in case of correct treatment and storage Incompatible Materials No dangerous reactions known Hazardous Decomposition Products No decomposition if used correctly Section 11– Toxicological Information Inhalative Toxicity N/A Skin Irritation May cause skin irritation Eye Irritation May cause irritation to eyes Carcinogenicity No data available Acute Toxicity Mutagenicity, cancerogenic,reproduction toxicity No data available Not known Section 12– Ecological Information Ecotoxicity No data available Persistence/Degradability No data available Bioaccumulative Potential No data available Mobility in Soil Other No data available In the case of appropriate handling and use, no ecological problems are to be expected Section 13– Disposal Consideration Dispose in accordance with applicable regional, national, and local laws and regulations.Packaging which cannot be cleaned has to be disposed in the sam way like the substance itself Section 14– Transport No dangerous goods according to the transport regulations Section 15– Regulatory Information The product is classified according to the EC guidelines and applicable national laws. Section 16– Other Information The information contained in this document is based upon our current level of knowledge and reflects our best professional judgement in which the product is delivered, but does not offer any guarantee or warranty. Neither our company nor any subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained in this document. All materials may present unknown. This information is provided with the condition that the person receiving it will make their own determination of the suitability of the product for their particular use.