Suitable for DJI Mini 3Pro Buoyancy Bar Set Foldable Flight Booster

Material: plastic/plastic Product Category: Helicopter Specifications: mini3pro buoyancy bar Whether static model: no Control method: none Whether electric: no 3C configuration category: toys over 14 years old Applicable age: youth (15-35 years old) Product name MINI 3 PRO (Increasing tripod + buoyancy bar set) Product size 22.3x20x8.9 cm Applicable models DJI MINI 3 Pro Foldable design for portable storage The height-enhancing stand is made of high-quality plastic material and can be folded Sturdy and wear-resistant, but also easy to carry and store when going out                           Before                                               After  The tripod effectively increases the height by 5.3cm The height of the tripod is increased by 5.3cm, which effectively protects the visual and infrared obstacle avoidance system below. Expandable buoyancy bar Sophisticated design and careful use of O-ring mounting and fixing to the booster stand Easy installation and quick disassembly Lightweight and non-weight-bearing The net weight of the height-increasing tripod is 23.7g, which does not affect the flight speed and does not cause flight burden. Installation steps (Increasing tripod + buoyancy bar) 1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same. 2. Align the connector on the front of the booster stand with the connector on the bottom of the drone fuselage. 3. Secure the thick O-ring from one side of the heightening stand to the other side. 4. Place the buoyancy bar, use a thin O-ring to fasten one side, and wrap it around to the other side to fix it. 5. Installation is complete Installation steps (higher tripod) 1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same. 2. Align the connector in front of the height-enhancing stand with the connector on the bottom of the drone fuselage 3. Wind the thick O-ring from one side of the heightening stand to the other side to fix it. 4. Installation is complete Please pay attention Remove the rubber band when storing the folding stand When installing the buoyancy rod, fasten the thin O-ring in the opposite direction