StripForce X – Professional-Grade Super Concentrated Wood & Concrete Stripper

Heavy-Duty Paint, Stain, Sealer, Oil & Grease Stripping Solution When ordinary cleaners aren't strong enough, reach for StripForce X. This professional-grade, super-concentrated alkaline stripper is formulated for demanding exterior cleaning, restoration, pressure washing, and surface-preparation applications. StripForce X penetrates and emulsifies stubborn dirt, grease, oil, paint, stains, coatings, and sealers, helping contractors tackle difficult restoration projects on wood and concrete surfaces. With a powerful 13+ pH formula, StripForce X can be used with hot or cold water and adjusted to different concentrations depending on the severity of the job. Use stronger concentrations for stripping applications or dilute the concentrate for heavy-duty cleaning. Whether you're restoring a weathered wood deck, preparing concrete for resealing, removing an old stain or coating, or tackling heavily contaminated exterior surfaces, StripForce X gives professional contractors serious stripping power in a concentrated formula. Why Choose StripForce X? Super Concentrated Formula Get more usable solution from every gallon. StripForce X can be diluted according to the application, allowing contractors to adjust chemical strength instead of relying on a one-strength-fits-all cleaner. Professional Wood Stripper Ideal for restoration and surface-preparation projects where old stains, finishes, dirt, oils, and other contaminants need to be removed from wood. Concrete, Paver & Hardscape Cleaning Power The aggressive alkaline formula makes StripForce X an excellent option for heavy-duty concrete cleaning and preparation where grease, oil, grime, stains, sealers, and coatings are present. Paint, Stain & Sealer Removal For difficult stripping applications, StripForce X can be used at stronger concentrations—including full strength when appropriate—to attack stubborn paint, stains, and sealers. Works With Hot or Cold Water StripForce X performs in both hot-water and cold-water cleaning applications, making it an excellent chemical to keep on the truck for professional pressure washing and restoration work. Versatile Exterior Cleaning Applications In addition to wood and concrete, StripForce X may be diluted for certain asphalt and fiberglass shingle cleaning applications when used according to the application instructions and surface precautions. Recommended Applications StripForce X is designed for professional cleaning and restoration applications including: Wood deck stripping and restoration Concrete cleaning and stripping Paver and hardscape preparation Paint removal Wood stain removal Sealer and coating removal Oil and grease removal Heavy-duty exterior surface cleaning Surface preparation before refinishing or resealing Asphalt and fiberglass shingle cleaning at appropriate dilution ratios Mixing & Dilution StripForce X is a super concentrate and must be matched to the application. For general stripping, apply from full strength up to approximately 1:3, depending on the type and thickness of the finish being removed. For many cleaning applications, an effective working dilution falls between approximately 1:2 and 1:4. For difficult paint, stain, and sealer stripping, use at full strength when appropriate. Thoroughly wet the area being treated and remove standing puddles. Apply StripForce X using a low-pressure chemical applicator and allow approximately 10 minutes of dwell time, while preventing the product from drying on the surface. Layered coatings and stubborn finishes may require agitation, brushing, or a second application. When working with wood, rinse carefully at lower pressure to minimize the risk of damaging wood fibers. Concrete surfaces can typically tolerate a higher-pressure rinse when appropriate for the condition of the substrate. For vertical surfaces, apply cleaning solution from the bottom upward and rinse from the top downward to help produce a more uniform result. Asphalt Shingle Cleaning StripForce X is highly concentrated and must be diluted before roof-cleaning applications. For asphalt shingles, further dilution is required. A dilution of approximately 1:10 may be used as directed for the application. Always test an inconspicuous area first and follow appropriate roof-cleaning procedures. Product Specifications Product: StripForce X Type: Super-Concentrated Heavy-Duty Stripper & Cleaner Primary Surfaces: Wood & Concrete Color: Water White Odor: Odorless Physical State: Liquid pH: 13+ Concentration: Super Concentrate Water Compatibility: Hot or Cold Water DOT Classification: Hazardous Important Surface Precautions StripForce X is a powerful alkaline chemical and should be used by trained users with appropriate personal protective equipment. Do not use on polished or anodized aluminum. Do not use on aluminum or painted surfaces at concentrations stronger than the manufacturer's recommended safe dilution. When treating sensitive surfaces, always perform a small test area before proceeding. Never allow StripForce X to dry on the surface. Always rinse treated surfaces thoroughly. Protect surrounding vegetation, metals, glass, painted surfaces, vehicles, and other sensitive materials from overspray and runoff. Built for Professional Pressure Washing & Restoration Contractors StripForce X isn't another general-purpose exterior cleaner. It is designed for jobs where contractors need serious stripping and degreasing power. From deck restoration and concrete stripping to paver preparation, stain removal, sealer removal, paint stripping, and heavy-duty pressure washing, StripForce X gives professionals a versatile concentrated chemical capable of handling jobs that lighter cleaners leave behind.