Eternal Rival - Mid Tier Stickless Enclosure - Add Art in options

What is this? This is only an enclosure. No buttons, joystick, and PCB. Only the plastic panels and the items needed to build the box. All the components needed you will need to get separately, whether it’s on our website or elsewhere. What's a stickless controller? A button layout that simulates a keyboard. So no joystick. It’s like building a computer. All the components are sold separately. Depending on how much you want to  spend you can trick out your fightstick with the best components around, or just bare minimum to play arcade games. What is made out of? The enclosure is made out of cast acrylic (plastic). The case is fragile. We do not recommend dropping it or throwing it against the wall. It can easily crack if you are careless with it. Is it easy to build? Yes. It's kind of like IKEA furniture. Manual included. No Glue needed. Why do I need this? DIY. Fun to build. Start with an open canvas, there's no need to deal with low quality stock components and color buttons you don’t want. Customizable Add art! Play arcade games. Specs Width - 15.25in Length - 8in Outer height - 2.25in - 2.5in Weight - 2-4 lbs - nothing inside - can go up to 6lbs - with everything inside plus extra weight panels Side Walls -2 Layer Fightstick & Stickless - Top and bottom panels - 2 layers can be upgraded to 3 Case options Update: Enclosure comes standard with flush top screw mounts. How does color panel combination work? Here is an example click here Do I need the extra top/bottom weighted panels? Depends if you like it more heavy. Pros: More weight Even more sturdy top to play on (Some case include 3 tops) Cons: Adds height to the enclosure (could be a pro for some) What is feet with flush mount? The bottom of the case will allow you to flush mount the bottom or install rubber feet (hardware included) Component Wiring and PCB Kits – (Stickless) Kits are available on our store that has all the inner components on one product listing.  Can find it here. THE KIT DOES NOT COME WITH BUTTONS AND JOYSTICKS. For Buttons here Needs main action buttons needed for Stickless OG STICKLESS 11x 24mm buttons 1x 30mm buttons Shioken Star 9x 30mm buttons 3x 24mm button Screw-on and snap in are compatible Does not fit Euro/Happ style buttons Needs AUX Buttons (side buttons) The AUX/UTILITY buttons fit 24mm buttons. Total 6. Screw-on and snap in are compatible Does not fit Euro/Happ style buttons Needs Brook PCB (chip/brain) The PCB is where all the buttons and the joystick are connected to. Which then outputs to a console(s) of your choice by USB connection. Enclosures fit any Brook Fighting Board PCB Any PCB that is not a Brook will need adhesive stands Mounting holes and hardware are included for free. (can be upgraded) Needs: Passthrough Passthrough device is located on the front panel where you disconnect the wire from the case. It’s mounted on the enclosure Our cases can fit any of these 2 passthroughs USB C Adafruit Neutrik Needs Wiring (stickless) 20pin wire connector. Connects to the pcb --- which connects to the main action buttons, share, home, start and the joystick. Ground wire must be connected to each connector on the button (does not matter which prong). L3/R3/TK wire connector. Connects to the analog stick buttons the touch key. Short Printer cable. Connects to the PCB and Passthrough Long (Printer or USB C to USB A) cable . Connects to Passthrough to console. Stickless Cable How do I wire this together? Here is a diagram. Click here OLED Screen Compatibility Focus Attack .96 oled not compatible  Click Here - Eternal Rival .96 OLED SCREEN with cable   Click Here - Long Cable connector PCB to OLED Screen - arcadeshock.com Click Here -  Amazon .96 OLED SCREEN   Compatible with RP2040-CE boards, and certain Brook boards 1in Slim Side panel button link Click Here - 16mm Buttons Optional Add-On Bit Bang Player Led Neoprene Pad for lap play Steel Weights - add weight without the bulk LEGAL FOR ART PRINT If you knowingly violate copyright by printing copyrighted photos for personal use, you are liable to pay damages to the copyright owner. If the image is registered with the copyright office you may be required to pay statutory damages and all attorney fees. By ordering from Eternal Rival and accepting our Terms of Service you accept responsibility for ensuring you have proper permission and license to reproduce the image. Sometimes it is as easy as simply asking! Many photo studios, or artist will hand you a release to copy the prints you buy if you ask for it, and if you purchase hi-res files from your photographer or artist they will likely also include a release. Some places may want to charge extra for this or they may not allow it at all, preferring to have you order all copies and products directly through them. We value your privacy we now do not share on our social accounts or keep or archive or reproduce. If it is for personal use, it is best to keep it as personal use. Share at your discretion. In good faith we trust you the customer to have approve permission, or licensed artwork once uploaded as well as following copyright and infringement laws. We also have the right to deny any print if we feel it violates anyone’s rights.