StepRanger 60V Winch Kit

The factory winch for the StepRanger® Pro 60V — a 3,000 lb winch kit we developed specifically for this truck, built to run natively on its 60V electrical system. Why 60V-native matters Aftermarket winches are 12V, which means a DIY install on an electric truck requires a step-down converter, custom wiring, and guesswork. This kit runs straight off the Pro 60V's battery system — no converter, no voltage matching, no cobbled-together electrical work. It's the winch the truck was designed to carry. Bolt-on installation The Pro 60V ships with a winch mounting plate integrated into the frame, just below the front 2" receiver hitch. This kit bolts directly to that plate — no drilling, no fabrication. Everything you need comes in one box: winch, mounting hardware, and wiring. What it's for Slope work. Anchor and control the truck while loading on a grade, instead of putting it all on the brakes. Recovery. Pull the truck through the spots where you made a poor choice. Moving loads. Drag logs, equipment, and material to the truck when you can't drive to them. Specifications Rated line pull: 3,000 lbs Power: native 60V — runs directly off the Pro 60V battery system Mounting: bolts to the integrated front winch plate (below the front receiver hitch) What's Included StepRanger 3,000 lb winch All mounting bolts and hardware 60V wiring — everything needed to connect to the truck Fitment Fits the StepRanger Pro 60V. Not compatible with the All-Terrain or Pro 48V — the mounting plate and 60V electrical system are specific to the Pro 60V platform.