Stenner Econ Integrator Injection Pump - E20RH

ECON INTEGRATOR Water Meter Activated Injection Pump For Water Treatment On Livestock Farms An additional meter dedicated to chemical feed is not required. The Integrator is easily installed on a farm with a pulsing dry contact water meter. The pump injects a fixed amount of chemical per water volume as determined by the pulse rate of the meter in use. The Integrator’s built in relay allows an existing meter to tally water consumption to a controller. The internal relay repeats the signal from the meter through the pump to the controller. Water consumption from the meter is uninterrupted any time the pump has power. The pump is ideal for water line disinfection and pH adjustment. The Integrator allows the user to fine tune pH and ORP levels using undiluted chemicals eliminating the inaccuracy and labor of maintaining stock solutions on a daily basis–set it and forget it. Advantages over traditional water driven pumps. • Inject undiluted solutions directly into the water line; unrestricted flow to the drinker line. • Pumps are not harmed by scale, solids, disinfectants or acids. • Easily serviced with effortless tube replacement with the patented quick release pump head & solid one piece tube construction. Note: One meter can activate multiple pumps in series, eliminating the need to purchase additional equipment. Note: The pump operating times are digitally adjusted from 0.1 to 60 seconds in 1% increments Installation Points and Features • Requires 120V power and a pulsing water meter. • Small footprint accommodates existing plumbing. • Standby mode allows pump head service and still enables meter signal to controller via relay. • Installer simply wires two Integrator leads to meter, two leads to controller and installs injection point in pipe. • Multiple pumps can be wired in series. Patented Quick Release Pump Head Select from three models 4.5, 16 and 30 gallons per day up to 80 psi (17.0, 60.6 and 113.8 liters per day up to 5.5 bar). Compact with enclosed housing Solid one piece tube construction; lubrication is not required Solution is contained in the pump tube; not in contact with moving parts Self-priming and does not lose prime from off-gassing solutions Brushless motor Pump accessories included; wall mountable UL & cUL listed Pump Dimensions: 5.3. x 3.6 x 5.8 in. (13.5 x 9.2 x 14.7 cm) Shipping Weight: 4 lbs (1.8 kg) Optional Pump Mounting Accessories The Mounting Kit is for wall mount or to attach to a Stenner tank. The Stand is for horizontal display or to mount to a wall. Note:  Due to the custom nature of all Stenner pumps, they are not returnable.  Please make sure you are ordering the correct pump for your application.  If you have any questions, please call or email us before purchasing.