STEMfinity Bambu Lab H2C Combo, Filament, and Service Bundle

Important Update: Bambu Lab Products Due to high demand, Bambu Lab products may have slightly longer lead times and may not be be available to be shipped until we get stock for your order. We are diligently working with the vendor to ensure timely delivery. For the latest information on current stock, please contact one of our STEM Experts at 800.985.7836. STEMfinity Bambu Lab H2C Combo, Filament, and Service Bundle Additional Resources:  Spec Sheet Note For Classwallet Customers: Looking to order a Bambu Lab printer bundled with STEMfinity 3D Printing curriculum using Classwallet funds? Please see available options here. Highlights: Hotend Change Multi-material Printing Minimal Purge Waste Multi-Color Printing Precise & Fast Inductive Nozzle Heating Close-loop Servo Extruder Full Filament Path AI Error Detection 350°C Nozzles & 65°C Active Heated Chamber Optional 10W/40W Laser and Cutting Module 330*320*325 mm³ Build Volume 30-minute onboarding session 1-year repair service Uncompromising Multi-Material Paint No More, Print 7 Colors in One-Piece! Painting intricate models is a thing of the past — the H2C brings your designs to life with six-color printing and a versatile seventh nozzle for support or an additional color. No More Assembly — Print Multi-Material Parts in One Piece. With the H2C, you can print up to seven different materials in a single run — no nozzle purging required. Combine multiple material properties in one seamless structure and take integrated design to a whole new level. Print Durable Joints — Built Right Into the Parts. Print durable TPU ball joints for your robot models — flexible, long-lasting, and built for endless motion. Vortek Hotend Change System Multi-Material Printing with Minimal Purge Waste. In traditional single-nozzle multi-material printing, purging is needed to clear leftover material between filament changes. Vortek changes that with an intelligent hotend-swapping system that replaces the entire hotend - delivering faster, cleaner prints with minimal waste.  Fully Automatic Filament Change The Vortek system works seamlessly with your AMS, making the entire filament change process fully automatic - no need to manually load each filament into the toolhead.   Always Delivering the Most Efficient Combination The Vortek system can store filament information in the hotend's memory, ensuring the correct filament is matched to each hotend. If you are printing with more than seven filament types, the system can calculate the optimal combination to minimize purge waste.    Top Tier Printing Performance The PMSM servo extruder delivers up to 10 kg of maximum extrusion force—70% more than stepper motor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.   50 µm Ultra-Fine Motion Accuracy* With its Vision Encoder, the H2C achieves a distance-independent motion accuracy of less than 50 μm—thinner than human hair. The system automatically compensates for any mechanical drift during calibration, ensuring consistent precision and peak performance over time.*   Smooth Surface, Sharp Edges The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament, resulting in smoother surfaces and cleaner, sharper edges.   Unleash The Full Potential of High-Performance Materials The H2C's 65 °C actively heated chamber & 350°C Nozzles minimizes warping and deformation while enhancing layer adhesion for high-performance, high-temperature filaments.   *Onboarding Setup & Repairs Included through STEMfinity! We want you to be able to jump right into using your new 3D printer with confidence, and with the peace of mind that if anything goes wrong STEMfinity has you covered! Included in this bundle is a 30 minute live onboarding session (by appointment) conducted by STEMfinity's expert staff along with a 1-year repair coverage program. What's Included: Bambu Lab H2C Combo 3D Printer Bundle 1 Bambu Lab PLA Basic - Black 2 Bambu Lab PLA Basic - Blue 2 Bambu Lab PLA Basic - Red 2 Bambu Lab PLA Basic - Jade White 2 STEMfinity Bambu Lab Onboarding Setup & Repair Service 1 Technical Specifications: H2C Specs Item Specifications Printing Technology Fused Deposition Modeling Body Build Volume (W*D*H) Single Nozzle Printing: 325*320*320 mm³ (Left) Single Nozzle Printing: 305*320*325 mm³ (Right) Dual Nozzle Printing: 300*320*325 mm³ Total Volume for Two Nozzles: 330*320*325 mm³ Chassis Aluminum and Steel Outer Frame Plastic and Glass Physical Dimensions Physical Dimensions 492*514*626 mm³ Recommended Space for Printer: 700mm*700mm*1100mm Net Weight 32.5 kg (Gross Weight: H2C AMS Combo 44.7 kg; H2C Laser Full Combo-10W 49.0kg; H2C Laser Full Combo-10W 49.5 kg) Toolhead Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 350 °C Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm Filament Cutter Built-in Filament Diameter 1.75 mm Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor Heatbed Build Plate Material Flexible Steel Plate Included Build Plate Type Textured PEI Plate Supported Build Plate Type Textured PEI plate, Engineering Plate Max Heatbed Temperature 120 ℃ Speed Max Speed of Toolhead 1000 mm/s Max Acceleration of Toolhead 20,000 mm/s² Max Flow for Hotend 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) Chamber Temperature Control Active Chamber Heating Supported Max Temperature 65 °C Air Purification Pre-filter Grade G3 HEPA Filter Grade H12 Activated Carbon Filter Type Granulated Coconut Shell VOC Filtration Superior Particulate Matter Filtration Supported Cooling Part Cooling Fan Closed Loop Control Cooling Fan for Hotend Closed Loop Control Main Control Board Fan Closed Loop Control Chamber Exhaust Fan Closed Loop Control Chamber Heat Circulation Fan Closed Loop Control Auxiliary Part Cooling Fan Closed Loop Control Toolhead Enhanced Cooling Fan Closed Loop Control Supported Filament Type PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS;Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS Sensor Live View Camera Built-in; 1920*1080 Nozzle Camera Built-in; 1920*1080 BirdsEye Camera Built-in; 3264*2448 (Equipped with Laser Edition) Toolhead Camera Built-in; 1600*1200 Door Sensor Supported Filament Run Out Sensor Supported Filament Tangle Sensor Supported Filament Odometry Supported with AMS Power Loss Recovery Supported Electrical Requirements Voltage 100-120 VAC, 50/60 Hz Max Power* 1250 W@110 V Typical Power 200 W@110 V (Single Nozzle Printing PLA) Please purchase the version corresponding to your region's voltage. Using the Printer in different regions, you may need to purchase a transformer accordingly. Working Temperature   10 °C-30 °C Electronics Touchscreen 5-inch 720*1280 Touchscreen Storage Built-in 8 GB EMMC and USB Port Control Interface Touchscreen, mobile App, PC App Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7 Application Processor Quad-core ARM with NPU Software Slicer Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. Supported Operating System MacOS, Windows, Linux Network Control Ethernet Not Available Wireless Network Wi-Fi Network Kill Switch Not Available Removable Network Module Not Available 802.1X Network Access Control Not Available Wi-Fi Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC) Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) Wi-Fi Protocol IEEE 802.11 a/b/g/n   Special Notes or Considerations: What's included in the STEMfinity Onboarding and Repair Service Program? 30-minute live onboarding session conducted by expert STEMfinity Staff Repair service for 12 months Free shipping for repair service (within the contiguous United States) Faulty part replacement up to $200 How do I schedule the live onboarding session? To schedule the live onboarding session, please wait for your printer to arrive, and then either call 800-985-7836 or email bambu@stemfinity.com to book an appointment.  What benefits does the STEMfinity Repair Service provide beyond the 12-month warranty service that's included on all Bambu Lab printers by default? Bambu Lab only covers repairs for manufacturer or shipping related damage under their default warranty, but under the STEMfinity Repair Service program we also cover normal wear and tear, and even accidental damage, up to $200 per repair instance! If the hotend on your printer burns out in the first year from excessive use, we send you a new one, no questions asked!  Does the $200 limit include the cost of labor to make the repair? The cost of labor is included in this plan, and the $200 limit is just for the cost of repair parts! What happens if my printer repairs cost more than $200? We'll still cover the first $200 worth of repairs and just ask for payment for any amount over $200. We will NOT invoice you for additional repair costs without your express permission! What if I'm located in Alaska or Hawaii? Is shipping still free? Unfortunately we may need to request additional fees for repairs shipping outside of the contiguous United States, but we will do our best to provide you with a fair shipping rate! What if I'm not located in the United States? Unfortunately at this time this bundle is not available for customers located outside of the United States. We hope to be able to offer this as an option for our international customers in the future.