RUN 3-Phase Motors 3 to 5HP, 230VAC, with Static Phase Converters

AUcontrols Static Phase Converter for 3 to 5HP,230V, 3-Phase Motors RUN 3-Phase, Motors with 208-240 VAC Single Phase Power AT 60% OF MOTOR'S RATED HP. DESIGNED TO RUN 3-Phase, Motors ONLY! FOR LIGHT to MEDIUM LOADS HP Range: Min: 3   Max: 5. Power Supply: Single Phase 208 - 240 VAC 50/60 Hz. Single Phase FLA: 15 Amps Dimensions: 8" X 8" X 4". 1 Year Warranty.   IMPORTANT:   > Do not buy a bigger Static Phase Converter than your Motor's HP thinking that you will get more power . It will NOT run, nor get a smaller Converter because it will not work either! Static Phase Converters DO NOT generate the 3rd Phase!  >Your Motor HP has to be between the Static Phase Converter HP to run properly. > If you are using a Motor Starter make sure the Motor Starter's Contactor's coil is fed from L1 & L2 (230VAC) otherwise it will not start. > You Can Run: Lathes not fitted with clutch, Milling & Drilling machines, Saws, etc. > For Air Compressors, blowers, water pumps and hyraulic pumps with pulley, the Motor's pulley diameter MUST BE REDUCED 1/3 or a 50% larger Motor can be fitted. You can use your motor with heavy starting cyles, frequent starting, instant reversing, etc. Keep in mind that Static Phase Converters will ONLY GIVE 60% OF MOTOR's rated HP. Installation Diagram Click Here