Standard Offset Brick Extension for Tapo D225 Flagship Doorbell (2024) | Custom Depth Brick Install

Standard Offset Brick Extension for the Tapo D225 Flagship Doorbell (2024) — Custom Depth Brick Install ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Standard Offset Brick Mount Engineered for the Tapo D225 The Tapo D225 Flagship Doorbell is a wired or battery-powered doorbell, and brick installs benefit from getting the doorbell projection right. This Standard Offset Brick Extension is custom-cut for your exact gap from 3/4" up to 8" in 1/8" increments, with a slim 9/16" base that fits standard wood trim. Front bracket sized exactly for the D225 mounting back — no shimming, no improvising. Engineered for the Tapo D225 Flagship Doorbell (Amazon ASIN B0D8MKQ5RC). 3D-printed to-order in the USA from UV-stable PETG, freeze-tolerant. Free shipping on orders over $100, ships in 2-3 business days, Replacement Guarantee covers a depth swap if your measurement is off. Compatibility — Custom-Cut for the Tapo D225 Flagship Doorbell This Standard Offset extension is custom-cut for the Tapo D225 Flagship Doorbell — Amazon ASIN B0D8MKQ5RC. Tapo’s D225 doorbell with the wired or battery-powered setup. Does NOT fit: other Tapo doorbell models with different mounting backs, or any non-Tapo video doorbell. Each major doorbell body has its own dedicated brick mount on our store. Not sure which Tapo model you have? Send a photo of the back of your doorbell to shop@doorbellmount.com — we’ll confirm fit before you order. Don’t have the doorbell yet? Buy the Tapo D225 Flagship Doorbell on Amazon → Standard Offset Brick Mount — Push Past Storm Doors and Trim Standard Offset is the most popular brick mount choice. It pushes the doorbell forward enough to clear storm doors, weather stripping, and most trim — without the deeper projection of Full Offset. Default 3 inch size fits the majority of installs. Pick the right offset for your install: Use Standard Offset ($38-$120) to clear a storm door or trim. Use Full Offset ($50-$140) for maximum projection past brick edges. Use Brick Face Extension ($30-$110) if your doorbell would be recessed BEHIND the brick face and you want it flush with the brick. Standard Offset Brick Extension Dimensions & Material Front Face Width: Sized to fit the Tapo D225 mounting back exactly Base Width: 9/16 inch (slim profile, fits within standard wood trim) Projection Depth: Custom-cut from 1/4 inch up to 8 inches in 1/8 inch increments Pricing: Scales with depth from $38 to $120 Base Mounting: 2 holes, anchor in WOOD TRIM with #6 screws (#2 Phillips driver) Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant Customization & Add-On Options Angled Trim? Use our Angle Shim Set (5°, 10°, 15°) ($5). Wire Hole Far From Brick? Add a Brick Bottom Filler Spacer Plate ($5-$10). Wrong Depth Ordered? Replacement Brick Extension ($25). Brick-Matching Color? Default ships in Black. For brick-matching prints (red, tan, gray) use the Color Change Request. Installing Your Standard Offset Brick Extension on the Tapo D225 Prepare: Tapo D225 can be wired (16-24V AC) or battery-powered. Tapo D225 can be wired (16-24V AC) or battery-powered. For wired, turn OFF power at the breaker. For battery, skip the breaker step. Route Wires: Wired: lead the 16-24V wires through the rear of the brick extension and out the front. Battery: skip this step. Mount the Extension Base: Anchor the back over wood trim with 2 provided #6 wood screws using a #2 Phillips screwdriver. Attach the Mounting Bracket: Fasten the Tapo D225 adapter bracket to the front using the 4 small #4 center screws. USE #1 Phillips PRECISION screwdriver. Connect the Doorbell: Wired: strip wires (1/4 inch) and connect to the Tapo terminals (AC polarity does NOT matter). Battery: skip wire terminals. Secure and Finalize: Mount the Tapo D225 to the bracket. Reinstall cover. Open the Tapo app, check Live View, redraw motion zones to match the new mounting position. FAQ — Tapo D225 Standard Offset Brick Extension Will this Standard Offset fit the Tapo D225 Flagship Doorbell?Yes. The front-face mounting plate is shaped for the Tapo D225 Flagship Doorbell body (Amazon ASIN B0D8MKQ5RC, 2024). Other Tapo models with different bodies need their own brackets. How do the three brick mount types compare?Standard Offset ($38-$120) clears storm doors and trim. Full Offset ($50-$140) projects further past brick edges. Brick Face Extension ($30-$110) sits flush when recessed behind brick. What if I order the wrong depth?Send us a picture before installing. Under our Replacement Guarantee, we will ship the correct depth at NO additional cost. Is the brick extension weatherproof?Yes — UV-stable PETG, freeze-tolerant. Real-world installs at 4+ years. Do I lose any Tapo features using this extension?No. The extension is a passive 3D-printed PETG part with no electronics. All Tapo D225 features work exactly as on the stock plate. What depths are available?From 1/4 inch to 8 inches in 1/8 inch increments. Default 3 inch. Pricing $38-$120. ✔ Replacement Guarantee — The Right Depth, Guaranteed Send a picture of your install area BEFORE you order. We’ll confirm the exact depth that fits. Need to Buy the Doorbell, Tools, or Caulk? Tapo D225 Flagship Doorbell (2024) — B0D8MKQ5RC #1 Phillips PRECISION screwdriver Clear outdoor silicone caulk Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. Questions? Need Help Picking the Right Depth? Email: shop@doorbellmount.com | Text/Call: 1-833-326-6868 Order your Standard Offset Brick Extension for the Tapo D225 (2024) today — free shipping over $100, Replacement Guarantee included.