Double-Cutaway Contoured Electric Guitar Kit, Stripewood Body, Rosewood Fretboard, Black Hardware

Ready to add a new badge to your DIY hall of fame? Our Zebrawood ST style body Guitar kit with an Rosewood fretboard is ready to roll with you. Put your craftsmanship to the test and create your very own right-handed guitar, featuring a bolt-on neck and 22 frets. It's practically a symphony of wood, eagerly waiting to play your tune. Time to pull out those tools and let the music begin! Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (4/10) Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right, but the tremolo bridge requires careful setup for tuning stability A 5-way switch means more soldered joints to keep tidy in the cavity Solid top with no veneer, so there is no risk of sanding through a decorative layer Body Material: Zebrawood (Engineered) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Zebrawood (Engineered) Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 648mm / 25.5″ Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Nut Width: 42 mm Electronics Neck Pickup: Single Coil Middle Pickup: Single Coil Bridge Pickup: Single Coil Controls: 1 Volume, 2 Tone, 5-Way Selector Wiring: DIY (soldering required) Wiring Diagram: SSS, 1 Volume, 2 Tone, 5-Way Selector Output Jack: Top jack Hardware Bridge: ST style with Tremolo Tuners: Sealed, Diecast Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Black What's in the Box Striped engineered-wood guitar body, double-cutaway and contoured, with a black pickguard already fitted Black pickguard assembly with three black single-coil pickups, three black numbered knobs, a blade selector switch and wiring Neck with fretted rosewood fingerboard and dot inlays 6x black sealed tuners with bushings and washers Black tremolo bridge with six saddles and a sustain block Black tremolo arm Tremolo spring claw with two mounting screws 3x springs Black neck plate with four mounting screws Black back cover plate with six string slots Black rectangular back cover plate Black boat-shaped jack plate with output jack fitted Assorted black mounting screws 2x Allen wrenches 2x black strap buttons 1x set of strings Black instrument cable with a right-angle plug What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.