SRAM AXS Pod Controller — 2-Button, Discrete Clamp

One button pod. Any AXS component. Either side of the bar. The AXS Pod is how you talk to a wireless drivetrain. Two buttons, a click-and-fire action, and full control over what each press actually does — assigned in the app rather than fixed at the factory. Lighter than the Eagle AXS controllers it replaces, with better ergonomics and far more mounting adjustability. Discrete clamp included. Click and fire The two-button action is tuned to a specific threshold — enough resistance that you'll never trigger a shift by resting a thumb on it, light enough that a gloved hand in the cold still gets a clean, positive click. That threshold matters more than it sounds. A controller that fires too easily gives you phantom shifts over rough ground. One that takes too much force makes you reposition your hand to use it. This sits in the middle, and it feels the same on the first ride and the two-hundredth because there's no cable tension to change. Assign the buttons however you want Neither button has a fixed job. Pair the Pod to the SRAM AXS app and you decide what each press does. Standard shifting — one button up, one button down Reversed — if you've come off another system and your thumbs disagree with SRAM's default Dropper control — run a second Pod for a Reverb AXS post Mixed — shifting on one, dropper on the other The app also shows battery levels across your whole AXS setup, pushes firmware updates, and handles service reminders. Pairing takes about a minute and works without the app if you'd rather not bother. Mounts on either side The Pod uses a flippable design, so a single component works left- or right-handed. Combined with app-assignable buttons, that means one part covers configurations that used to require two different SKUs. It's also multi-position on the clamp, so you can rotate and slide it to the exact spot your thumb naturally lands rather than accepting wherever the clamp happens to put it. Discrete clamp — what that means This version ships with a discrete clamp: its own dedicated bar clamp that mounts independently of everything else on your cockpit. The trade against SRAM's integrated clamps is simple. A discrete clamp works with any brake lever from any brand, and gives you complete freedom on bar position. An integrated bridge or Infinity clamp gives you a cleaner cockpit with fewer clamps on the bar, but only if you're running matching SRAM brakes. If your brakes aren't SRAM, or you just want the Pod exactly where you want it, discrete is the right choice. Works with everything AXS The Pod speaks the AXS protocol, which means it controls any AXS component regardless of tier or discipline: Eagle AXS and Eagle Transmission (T-Type) mountain drivetrains Road and gravel AXS drivetrains, including XPLR RockShox Reverb AXS dropper posts It's also ANT+ compatible, so it plays nicely with head units and other connected devices, and it's fully approved for e-bike use. Battery A single CR2032 coin cell, and it lasts a very long time — think seasons, not rides. When it does go, it's a drugstore part and a thirty-second job, not a charging routine. Worth keeping straight: this is separate from the rechargeable AXS batteries your derailleurs use. Two different systems, and people mix them up constantly. Fitment Protocol: AXS — compatible with all AXS components Clamp: Discrete, included Mounting: Left or right, multi-position Bars: Standard handlebar clamp diameter E-bike: Approved Not compatible with mechanical drivetrains, Shimano Di2, or any non-AXS electronic system Specifications Model: EC-AXS-POD-D1 Part number: 00.3018.405.000 Control points: Two buttons Action: Click and fire Default function: AXS rear derailleur Orientation: Right (flippable for left-hand use) Clamp type: Discrete Multi-position: Yes Lever adjust: No Battery: CR2032 Communication protocol: AXS ANT+ compatible: Yes E-bike approved: Yes Color: Black This is the standard AXS Pod. The Pod Ultimate adds adjustable ergonomic paddles at a higher price point. Installation Clamp it to the bar, torque to spec, and press the AXS button on both the Pod and the component you're pairing it to. About a minute, no app required. Take a few minutes to find the position before you tighten it down. The whole point of a multi-position clamp is finding where your thumb naturally sits rather than reaching for a fixed spot — and it's much easier to dial in with the bolt loose than to convince yourself later that it's fine. OE product information Not intended for retail sale. This is original-equipment product supplied for dealer service, warranty replacement, and complete-bike build applications. OE product is the same component that ships on complete bikes — identical specification, identical performance. What differs is how it's supplied: Plain bulk or poly packaging rather than a retail box No printed manuals or quick-start guides — all documentation is available free from SRAM's service hub No retail hang tags or display materials Small-parts and hardware content may differ from the retail pack Components may show minor handling marks from bulk packing Warranty. SRAM's consumer warranty program does not apply to original-equipment components. Warranty and defect claims on this item are administered by State Bicycle Co. Contact our support team with your order number. Crash damage and installation damage are not covered. Original equipment service item. Supplied in OE packaging for dealer service, warranty replacement, and complete-bike build applications; not a retail-packaged consumer product and not intended for retail sale. SRAM consumer warranty does not apply to original-equipment components — warranty administration on this item is provided by State Bicycle Co. Compatible only with SRAM AXS components. SRAM, AXS, Eagle, Transmission, T-Type, XPLR, and Reverb are trademarks of SRAM LLC. State Bicycle Co. is not affiliated with or endorsed by SRAM LLC. Specifications subject to change without notice.