Squeeze Play Hollow Metal Door Latch Forming Tool

The Squeeze-Play™ Hollow Metal Door Mortiser allows the locksmith to "form" a perfect square mortise in a steel door without cutting or using internal bridges. Simply insert the tool into the door and tighten the bolt, to form the mortise. Squeeze-Play™ automatically locates and center punches the locations of the bolt mounting screws. Hardened Steel construction, Grade 5 bolt, quality thrust bearing and black oxide coated for rust resistance. Squeeze-Play™ cuts installation time by 2/3 while preserving the structural integrity of the door. Never use a "drive-in" bolt again. Demand the Squeeze-Play™, Accept No Substitute. Nothing works like the Original. Manufactured by SPC for over 40 years. The Squeeze-Play™ tool creates a "perfect" square mortise in the edge of the steel door. The mortise will accommodate 2 1/4" x 1" and 2 1/4" x 1 1/8" square face bolts for deadbolts and cylindrical lockset latch bolts. The mortise is "formed" into the edge of the door. There is no cutting or loss of structural integrity of the door. The Squeeze-Play™ mortise tool has "markers", which mark the locations for the attachment screws. Simply drill and tap the steel door for the two 8-32 screws and install the bolt. This is the fastest and easiest way to install an auxiliary lock in a hollow steel door. Squeeze-Play™ will work on edge seamed doors, but it will not work for "center" seamed doors.