Evno SPX1-ST Soprano Saxophone Microphone (Stand Mounting)

The EVNO SPX1-ST soprano saxophone microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for soprano saxophone.  A stand mounted single microphone setup designed to produce the most gain before feedback.  The single microphone design is geared to be light weight in design while allowing the most crucial area of the instrument to be reproduced in a single microphone design.  The SPX1 microphone design is tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone. The stand clamp allows the player to walk up to the microphone which would be suspended from the ST-CL clamp with an extension rod.  Ideal for sound engineers looking for an instrument specific microphone for hard to mic instruments or the player that doesn’t need to move around on stage. The SPX1ST is the perfect choice for higher volume settings for solo performance, principal soloist’s in all genres, to high energy horn section bands of all styles.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The SPX1 is the ideal choice for soprano players also playing in a section and who may also want to use on alto, tenor, or Bari as well. Removing the microphone from its extension shaft and re-positioning the microphone body on to an alto, tenor, or bari bell is possible.  Bell mounted clamps are also available.   The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement. The SPX1 Stay-Flex gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard variable 7 point suspension ring, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.   The microphone system can be used wired or wirelessly.  The Evno SPX1 is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems.    (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the SPX1 model works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Evno clip-on wireless transmitters. Additional packages include the SPX1 system with Evno Wireless or the SPX1 microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems. The complete Evno SPX1-ST setup includes the Evno PS95 power supply / preamp, Evno ST-CL Stand Clamp, SPX1 Microphone, case, and a cable.  XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required.