Ceiling Kit for Sprinter

An expertly designed van ceiling kit, this Sprinter van ceiling kit is CNC-cut to precision, aligning seamlessly with the factory holes, making it an easy installation for passionate DIY enthusiasts and van builders!   Elevating your van conversion project has never been easier with the Sprinter Van Ceiling Kit. This meticulously crafted kit is designed to seamlessly upgrade your 2006-2024 Mercedes Sprinter Van, aligning perfectly with factory holes for a hassle-free DIY installation.   For those aiming to achieve a polished and professional appearance, pairing it with the GoCode Threshold Trim Kit is the way to go. With customizable options for front, rear, or full-trim kits, you can easily replace factory foam blocks. This kit is more than just aesthetics; it integrates convenience with hidden notches to neatly manage the wiring and offers a consistent gap between panels with union panels, all while including 12 pre-cut puck lights for a cozy ambiance.   If traveling in your campervan is the goal and you want to speed up the conversion process, the Sprinter Van Ceiling Kit is the way to go. This kit uses factory holes inside your van to ensure a perfect fit and quickly get you on the road. Our Sprinter Van Ceiling Kit was designed and engineered specifically for the Sprinter.    Ready to have a complete look to your van conversion? Check out our Wall Panel Kit & Flooring Kit! Features Neat Wiring Integration: Our ceiling kit's outer driver-side and center row features a concealed notch, allowing you to tuck away factory wiring harnesses and puck light wires neatly. This attention to detail ensures a sleek and organized interior. The ceiling kit extends to within 1/4" (6mm) of your factory wall edge. Union Panels for Consistency: Union panels hold the rows together from the backside, maintaining a consistent 1/8" gap between panels. This precise fit ensures a professional and aesthetically pleasing finish to your van conversion. Illuminating Ambiance: The Serg Supply Sprinter Van Ceiling Kit comes standard with 12 pre-cut puck lights, creating a warm and inviting atmosphere within your van. Should you desire a different lighting setup, we can remove lighting holes upon request. Please note that custom fan cutouts may affect the position and quantity of lights. Fan and Air-Conditioner Ready: For added convenience, our Fan Cutouts are compatible with most air-conditioner units with a profile close to the standard 14" x 14" size. This allows you to easily integrate ventilation and cooling solutions into your van life experience. Need a pre-made Fan Cutout? Leave a note in your order and we'll reach out about measurements. Fan cutouts are now free of charge! Materials Prefinished Maple (Water Resistant Core) Prefinished Amber Bamboo (Carbonized) Please refer to our materials page here to see images and details of each option: Materials What's Included Ceiling Panels Rivet Nuts Threaded Screws and Washers Proper Drill Bit Instructions (12) Light Pucks (12VLED) (2) Puck light 6-plug connecting harnesses Hardware: Please note that this product will come with Stainless Steel Hardware.  Please inform us if you would like Black Oxide and we can send you a quote for the change. Specs Material: 1/2"  Weight: 40-55 lbs Width of Panels: Range from 6 1/8" to 6 1/4" Puck Light hole bore: 2.125" Please refer to our specs page to see more images and details of each option: Spec Sheet Compatibility 2006 to 2024 MB Sprinter 144/170 High Roof NCV3 and VS30 models. Can be cut to accommodate Factory Foam Blobs, GoCode, or neither Maxx Air Fan and A/C cutouts are free of charge but only done upon request DIY Installation Each kit has detailed directions on installing your own ceiling kit. These kits are designed to fit already existing factory holes in your sprinter. How to Wire your Included Puck Lights Installation Difficulty: Medium | 2 people Installation Time: 1-3 Hours Tools Needed: Power Drill, Rivet Nut Tool FAQs How does the ceiling kit mount? All Mercedes Benz sprinter kits are designed to fit directly into the factory holes in your ceiling. The factory holes will need to be bored out to 3/8" for rivet nut inserts before installation. All panels are mounted 0.125" apart and cover the entirety of the ceiling between walls.   Will the ceiling kits work with ceiling fan cutouts? Yes, our team can pre-cut a fan for you if requested for an additional charge of $100.  We will reach out to you once your order has been placed and walk you through measuring your fan cutout.   How do I apply stain, finish, or sealer? Painting: Lightly scuff the entire surface of the product that you plan on coating with 120-180 grit sandpaper. Both Unfinished Maple and Prefinished Maple are paint-grade. Apply 2-3 coats of primer before applying your main coat. Always apply a finish when you're happy with the paint to get a long-lasting appearance. Staining: Sand the surface on all faces with sandpaper traveling with the grain of the wood. Apply stain very cautiously to a section of the product that will not be visible to gauge the volume and pressure you need to achieve the desired look. Apply the stain evenly with a rag, sponge, or spray gun until all surfaces are coated. Please note that overlapping surfaces may make the stain darker on the overlapped areas. Always apply a finish when you're happy with the stain for a long-lasting appearance. Other Notes We can not guarantee consistency in grain or pattern in natural wood colors as they are made from real wood veneer, and sometimes nature is inconsistent. 1/2" Plywood panels are plywood with veneer laminate, and because of this, the grain will be visible on the sides between the 1/8" gaps. Panels are not edge banded as more temperate climates may cause the adhesive to melt and banding to peel. For this reason, raw wood is visible on the sides of the panels. If a panel is damaged, we won't make you purchase a new kit. Let us know which panel, and we can ship a replacement! Not all vans come off the factory line identically. Expect a handful of rivet nuts to be a few millimeters off-course. These must be widened out with the drill bit or burring bit for the screws to align appropriately.