Microwave Cabinet with Storage for Sprinter, Transit and Promaster Vans

Create the optimal living space with a professional builder look with our Squared Overhead Van Microwave Cabinet from Serg Supply. This cabinet is available for your Sprinter, Transit or Promaster van! Crafted with precision and designed for convenience, this versatile cabinet is a must-have addition for van enthusiasts, builders, and DIY enthusiasts who want quick microwave access on the road with a low draw 700W unit.   What sets this Microwave cabinet apart is its adaptability, allowing flexible mounting options to meet your unique needs, from walls and ceiling panels to the overhead frame. All upper cabinetry materials are made from the same paint-grade plywood used in custom kitchen builds and are designed to withstand years of daily use. With a custom fit for your vehicle make and model, these cabinets are built to last, boasting robust construction capable of holding up to 100lbs of storage per cabinet. Plus, the prefinished Maple and Bamboo options with a satin urethane seal bring an elegant finish to your mobile living space.   Still need additional storage? Check out Wheel Well Cabinets for ultimate storage!   Note: Cabinet does not come with stick on rubber outer bumpers.  Features Large Access Door: Enjoy easy storage access with a spacious door that simplifies your on-the-road organization. Microwave Included Secure Closure: The Sprinter Squared Overhead Van Cabinet is equipped with black compression latches, ensuring a firm and dependable closure, even during your most adventurous journeys. Modern Aesthetics: Its square edge design with inset doors provides a contemporary and sleek appearance, seamlessly blending with your van's interior. Flexible Mounting: These cabinets offer various mounting options, allowing you to attach them to walls, ceiling panels, headliners, or directly to the overhead frame (Rivet Nuts Recommended). Versatility at its best! Quality Craftsmanship: Constructed from veneer plywood, these cabinets exhibit the charm of natural lumber, with exposed grains on the interior, adding a touch of rustic elegance to your mobile living space. Custom Fit: The back curve of the cabinet is expertly cut to match your specific vehicle make and model, ensuring a perfect fit for your van conversion. Lighting Ready: Please note that lights are not pre-wired to the ballast. You'll have the flexibility to wire them to your own ballast and central power system, putting you in control of your lighting setup. Robust and Durable: These cabinets are built to withstand the rigors of the road and can hold heavy cargo without breaking. Each cabinet is designed to handle up to 100lbs of storage, ensuring your belongings stay secure during your van life adventures. Elegant Finishes: The Sprinter Squared Overhead Van Cabinet comes in your choice of prefinished Maple, Black Hex, or Bamboo with a satin urethane seal, adding a touch of sophistication to your van's interior. Note: Cabinet does not come with stick on rubber outer bumpers.  Materials  Material Options:  Prefinished Maple Prefinished Amber Bamboo Stealth (Black Hex-Ply) Hardware: Please note that this product will come with Stainless Steel Hardware.  Please inform us if you would like Black Oxide and we can send you a quote for the change. Please refer to our materials page here to see images and details of each option: Materials Specifications Length: 40" Depth: 15" Height: 15" Microwave Volume: 0.7 cu. ft. Microwave Power Consumption: 700W @ 110VAC Please refer to our specs page to see more images and details of each option: Spec Sheet DIY Installation Installation Difficulty: Medium | 2 people Installation Time: 1 Hour Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits FAQs How does this cabinet mount? The overhead Cabinet hangs in place as any of our other cabinets with 2" Fasteners + Washers into factory holes with Rivet Nuts. Once the cabinet mounted, the microwave slides in and falls into a mounting plate. An anchored hook and loop strap passing through the partition is used to cinch the unit down in place.   Will these cabinets perfectly fit my vehicle? All overhead cabinets have a curved backing and curved top to fit the factory curvature of the vehicle. While this will fit most wall paneling/ceiling setups, minor modifications may be required to install these cabinets with builds utilizing furring strips. It is strongly recommended that this cabinet is mounted using rivet nuts as specified by our Installation Guide.   Can this fit my Adventure Wagon? Yes! All of our cabinetry can be made Adventure Wagon Compatible if stated in your order notes.   How do I apply paint?  First you will lightly scuff the entire cabinet surface that you plan on coating with 120-180 grit sandpaper. Then you will apply 2-3 coats of primer before applying your main coat. Always apply a finish when you're happy with the paint to get a long-lasting appearance.   How do I apply stain or sealer?  First you will sand the surface on all faces with sandpaper traveling with the grain of the wood. Then you will apply stain very cautiously to a section of the cabinet that will not be visible to gauge the volume and pressure you need to achieve the look you want. Next you will apply the stain evenly with a rag, sponge, or spray gun until all surfaces are coated. Please note that overlapping surfaces may make the stain darker on the overlapped areas. Always apply a finish when you're happy with the stain to get a long-lasting appearance. Is the wood color consistent across orders? A lumber pattern is not guaranteed. This comes from raw lumber and varies in tint, shade, and grain. Minor defects in the veneer also occur occasionally, and we make a great effort not to use any lumber with serious flaws. The ends are made from natural wood, not veneer. For this reason, you may see small gaps (~0.075") at the ends and centers of your cabinet sections. These may be filled with putty, painted over, or ignored.