Spray Bottle – 24 oz (Content Check Boxes & Graduations)

The CleanCheck spray bottles are printed with content check boxes for easy identification of contents. Bottles are printed with ultra violet ink for superior chemical resistance and have a bright, glossy finish. Printed area includes easy to read safety information, MSDS reference, eye and hand protection.   HDPE bottle Polypropylene sprayer included Nitrile O-rings & seating cup Blank content box for own identification Imprint is in English & Spanish Molded in oz., mL & dilution scale 28/400 neck size 1.4mL per stroke Dimensions: 3.3125" Dia. x 8.3125" Hgt.   Information on use with RapidAir FastPipe aluminum compressed air pipe installations below.                              Specifications: 24 oz size (0.70 L) Sold individually (each) Bottle - HDPE material Sprayer – Polypropylene material Nitrile O-rings Spray bottle is a round shape design Spray bottle has a natural color 28/400 neck size Dimensions: 3.438" Diameter x 6.873” Height 1.4ml per stroke Weight: 0.165 lbs.    Information: If using for a RapidAir FastPipe installation, please see information and steps below: The spray bottle is for use with the RapidAir FastPipe compressed air system.  The spray bottle (F0139) is used to wet the end of the pipe with a very diluted soapy water solution.  This allows the FastPipe fitting to slip over the pipe end and not disturb the O-ring in the fitting.     FastPipe Installation Steps: CUT PIPE TO LENGTH with tubbing cutter (cut must be square)           (DO NOT USE HACK SAW)   DEBURR the end of the pipe outside and inside           (a smooth edge allows easy fitting assembly and no damage to the fitting o-ring)   MARK END OF PIPE for the proper insertion depth ¾” Fittings: 2 inches 1” Fittings: 2 ¾ inches 1 ½” Fittings: 4 inches 2” Fittings: 4 ¾ inches 3” Fittings: 4 ½ inches   WET END OF PIPE, with very diluted soapy water          (DO NOT USE ANY OIL OR GREASE LUBRICANT)   LOOSEN fitting cone nut partially          LOOK INSIDE EACH FITTING FOR INNER PARTS          (inner parts, o-ring, stainless steel bite ring)   INSERT PIPE into fitting until pipe bottoms out          HAND TIGHTEN fitting          FULLY TIGHTEN fitting with FastPipe spanner wrenches     Please note that the spray bottle can also be purchased as part of the installation tool kit based on the size of FastPipe that you are installing.  In addition, the Pipe Selection Guide and Quote Form can be found below.