Spooner Frame Bag

This is a cool variation on our standard frame bag. It is actually two bags that can be used together or separately, connected by strong Velcro. Plastic reinforcement strips are sewn into the panels where the Velcro connection is to help hold the bag's shape and structure when only one bag is being used. The Spooner Frame Bag is fully custom, constructed with your choice of X-Pac, Dyneema, or 1000 Denier fabrics. Custom printed fabrics are available so you can express yourself and have the frame bag of your dreams!  The shape of the two bags is fully customizable. It is common to shape the bags so that your frame bosses can be used to carry water bottles when only using one bag. The side panels for the seat tube and down tube are constructed with black Ballistic Cordura for durability in these higher abrasion areas. The top tube panel will match your main fabric choice or can be customized for an accent color.  The seat, top, and down tube are padded to protect your items and to prevent them from rattling against your frame. The bag is lined with a light colored pack-cloth fabric to increase visibility inside the bag. Bags are 2.75" wide at the seat tube and taper to 3.5" at the head tube as a standard, but this can be changed at your request. The drive-side zippers are YKK #10 nylon with hoods, and if you choose to have a non-drive side map pocket it can have a YKK #8 Aquaguard or YKK #10 nylon zipper depending on your preference. The zippered flat map pocket on the non-drive side (if added) typically goes on the top bag 1.5"down from the top tube, but it can be placed on the lower bag (or both) upon request. This pocket contains double mesh pockets inside and a key holder (example in photos). The hydration port is standard and allows your water hose to come out the top panel of the bag near the head tube. If you plan on using the hydration port, I recommend either the Platypus 2.0 L bladder with a quick disconnect or the Apidura Frame Pack hydration bladder in the 1.5 or 3.0-L size (which fits in the bottom of your frame bag). I use a retractable cord to connect the hose to my handlebars. The frame bag can be made without a hydration port at your request. All seams are double-stitched with 100% polyester thread for durability, UV protection, and mildew resistance. All seams are finished to prevent fraying. There are lace-up and bolt-on options for attaching the bag to your frame. There is an option to add a bike pump strap on the inside top of the top tube panel. It is a daisy chain that runs along the length of the top tube with two or three straps of one-wrap Velcro to hold the bike pump or tent poles in place (example in the pictures). Be sure to follow the custom framebag instructions to ensure a perfect fit. Please email sales@broadforkbags.com for custom inquiries. Handmade in Salt Lake City, UT.