
$4,938.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The MS700-22 platform is built for high output in a space-saving 22"-wide cabinet. This W2F version combines two specialized traits: water cooling and 208–230V / 60 Hz single-phase power. It packs serious full-dice capacity into a footprint narrower than the 30" SPIKA MS500. The cabinet is taller and deeper to fit the larger system into the narrow footprint. Water cooling transfers condenser heat to a water loop instead of blowing it into the room, which keeps the machine running cooler and quieter and protects output in hot kitchens or spaces with limited airflow, where an air-cooled machine would struggle. The trade-off is water use — a water-cooled condenser consumes considerably more water than an air-cooled model — so it's best where ambient heat or ventilation is the limiting factor, and that water cost is acceptable. Combined with the 208–230V supply (lower running current than a 115V unit), it suits sites with specific electrical and environmental constraints. Water-cooled SPIKA units are typically supplied as a special order. Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 240 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with a range of ITV storage bins and can be stacked two-high on the larger SCD-series bins. A smart electronic control board manages all parameters and displays self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. Key Features Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms 208–230V / 60 Hz / single-phase power — lower running current than a 115V unit Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube High output from a 22" footprint: up to 676 lb (307 kg) per day Approx. 240 cubes per cycle Stackable two-high on larger SCD-series bins Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Hot kitchens or rooms with limited ventilation where air-cooled output would suffer Sites wired for 208–230V that also need water-cooled operation Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter Sites where lower noise and heat output in the room are priorities and water cost is acceptable Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins Condenser / Cooling Water-cooled Ice Production (nominal)* 676 lb (307 kg) / 24 h Ice Production (ASHRAE)* ~527 lb (239 kg) / 24 h Cubes per Cycle ~240 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F)† 1,070 W ASHRAE Cooling Capacity 13,853 BTU/h (4,060 W) Heat Rejected 9,076 BTU/h (2,660 W) Energy Use† 8.4 kWh / 100 lb of ice Water Consumption (total, incl. condenser)† 71.31 gal / 100 lb of ice Wiring / Fuse 14 AWG (2.5 mm²), 3-conductor / 16 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 22" × 24.45" × 25.95" (559 × 621 × 659 mm) Shipping Dimensions (W × D × H) 25.6" × 27.96" × 32.29" (650 × 710 × 820 mm) Net Weight† ~155 lb (70 kg) Shipping Weight† ~181 lb (82 kg) Certifications NSF, ETL (Intertek) *Full-dice production figures are referenced from the 115V full-dice datasheet; the 208–230V sheet does not publish full-dice output. †Referenced from the 115V water-cooled datasheet; the 208–230V sheet leaves the water-cooled power, energy, water-consumption, and weight figures blank. Confirm exact 208–230V water-cooled specs with ITV. Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS102 — double 10" anti-limescale + anti-chlorine water filter CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine) Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S400 and SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1350, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS700W2F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS700A2F. Need 115V water-cooled power instead? See the SPIKA MS700W1F.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$4,938.00