
$4,938.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The MS700-22 platform is built for high output in a space-saving 22"-wide cabinet. At up to 676 lb (307 kg) per day, the MS700W1F packs serious capacity into a footprint narrower than the 30" SPIKA MS500 — useful where floor space is tight but ice demand is high. The cabinet is taller and deeper to fit the larger system into the narrow footprint. This version is water-cooled: instead of blowing condenser heat into the room, it transfers heat to a water loop. That keeps the machine running cooler and quieter and protects output in hot kitchens or spaces with limited airflow, where an air-cooled machine would struggle. The trade-off is water use — the condenser consumes about 71.31 gal per 100 lb of ice, much more than the air-cooled version — so it's best where ambient heat or ventilation is the limiting factor and that water cost is acceptable. Water-cooled SPIKA units are often supplied as a special order. Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 240 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with a range of ITV storage bins and can be stacked two-high on the larger SCD-series bins. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. It runs on 115 V single-phase power. Key Features Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube High output from a 22" footprint: up to 676 lb (307 kg) per day Approx. 240 cubes per cycle Lower power draw than the air-cooled model (1,070 W vs 1,350 W at 109°F) Stackable two-high on larger SCD-series bins 115 V / 60 Hz / single-phase power Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Hot kitchens or rooms with limited ventilation where air-cooled output would suffer Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter Sites where lower noise and heat output in the room are priorities and water cost is acceptable Operations that may scale up later by stacking a second head on a larger bin Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins Condenser / Cooling Water-cooled Ice Production (nominal) 676 lb (307 kg) / 24 h Ice Production (ASHRAE) ~527 lb (239 kg) / 24 h Production Range (across conditions) ~378–707 lb (171–321 kg) / 24 h Cubes per Cycle ~240 Refrigerant R404A Electrical 115 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) 1,070 W ASHRAE Cooling Capacity 13,853 BTU/h (4,060 W) Heat Rejected 9,076 BTU/h (2,660 W) Energy Use 8.4 kWh / 100 lb of ice Water Consumption (total, incl. condenser) 71.31 gal / 100 lb of ice (78.6 L/h) Wiring / Fuse 14 AWG (2.5 mm²), 3-conductor / 25 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 22" × 24.45" × 25.95" (559 × 621 × 659 mm) Shipping Dimensions (W × D × H) 25.6" × 27.96" × 32.29" (650 × 710 × 820 mm) Net Weight 155 lb (70 kg) Shipping Weight 181 lb (82 kg) Certifications NSF, ETL (Intertek) Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS102 — double 10" anti-limescale + anti-chlorine water filter CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine) Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S400 and SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1350, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS700W1F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS700A1F. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS700W1H.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$4,938.00