
$4,938.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The MS700-22 platform is built for high output in a space-saving 22"-wide cabinet. This A2F version runs on 208–230V / 60 Hz single-phase power — the higher supply voltage means a lower running current (a 16 A circuit versus the 25 A needed by the 115V model), which can make it easier to fit into a panel where 115V capacity is tight. It packs serious full-dice capacity into a footprint narrower than the 30" SPIKA MS500. The cabinet is taller and deeper to fit the larger system into the narrow footprint. Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 240 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor that cascades water across the entire evaporator so each cube takes shape cleanly and consistently. The head pairs with a range of ITV storage bins to match your volume, and it can be stacked two-high on the larger SCD-series bins. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. As an air-cooled machine, it installs easily wherever there's adequate ventilation. Key Features 208–230V / 60 Hz / single-phase power — lower running current (16 A) than the 115V model Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube High output from a 22" footprint: up to 676 lb (307 kg) per day Approx. 240 cubes per cycle Energy-efficient: 4.72 kWh / 100 lb of ice Stackable two-high on larger SCD-series bins Air-cooled for simple installation wherever there's adequate ventilation Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Sites wired for 208–230V or where 115V circuit capacity is limited Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter Busy operations needing high full-dice capacity in a narrow footprint Operations that may scale up later by stacking a second head on a larger bin Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins Condenser / Cooling Air-cooled Ice Production (nominal)* 676 lb (307 kg) / 24 h Ice Production (ASHRAE)* ~527 lb (239 kg) / 24 h Cubes per Cycle ~240 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) 1,290 W ASHRAE Cooling Capacity 13,853 BTU/h (4,060 W) Heat Rejected 9,076 BTU/h (2,660 W) Energy Use 4.72 kWh / 100 lb of ice Water Consumption ~17 gal / 100 lb of ice Wiring / Fuse 14 AWG (2.5 mm²), 3-conductor / 16 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 22" × 24.45" × 25.95" (559 × 621 × 659 mm) Shipping Dimensions (W × D × H) 25.6" × 27.96" × 32.29" (650 × 710 × 820 mm) Net Weight 155 lb (70 kg) Shipping Weight 181 lb (82 kg) Certifications NSF, ETL (Intertek) *Full-dice production figures are referenced from the 115V full-dice datasheet; the 208–230V sheet does not publish full-dice output. Confirm the exact 208–230V full-dice rating with ITV. Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS102 — double 10" anti-limescale + anti-chlorine water filter CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine) Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S400 and SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1350, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS700A2F is a head-only unit and needs a separate storage bin to operate. Need 115V power instead? See the SPIKA MS700A1F. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS700A2H.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$4,938.00