
$4,259.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
This model is the water-cooled, full-dice member of the SPIKA MS500 family — a good fit when you want a premium cube but the install location is warm, enclosed, or poorly ventilated. Because it rejects heat into condenser water rather than the surrounding air, the MS500W1F keeps producing at a consistent rate where an air-cooled machine would fade, and it runs a little more efficiently on electricity (4.3 vs. 5.3 kWh per 100 lb). The trade-off is water: a water-cooled condenser uses substantially more of it and needs a proper supply and drain, so it's best reserved for sites where ambient heat or ventilation rules out air cooling. The full-dice cube measures about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, ideal for spirits, cocktails, and upscale fountain service. The machine forms about 200 cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor that cascades water across the entire evaporator for clean, consistent cubes. At nominal conditions, it makes 507 lb (230 kg) per day and 456 lb (207 kg) at ASHRAE conditions, ranging from roughly 432 to 531 lb per day depending on conditions — and because it's water-cooled, that output stays steady regardless of room temperature. On a 30" footprint, it pairs with a range of ITV storage bins and is stackable — two heads on one large bin with the optional stacking kit. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. It runs on 208–230 V single-phase power. Key Features Water-cooled condenser: steady output in hot or poorly ventilated spaces; no heat rejected into the room Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube High output: up to 507 lb (230 kg) per day nominal; 456 lb (207 kg) at ASHRAE More electrically efficient: 4.3 kWh / 100 lb (vs. 5.3 for the air-cooled version) Approx. 200 cubes per cycle Stackable: two heads on one bin with the optional stacking kit 208–230 V / 60 Hz / single-phase power Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Bars and premium beverage service in kitchens where heat or limited ventilation makes air cooling impractical Spirits and cocktail programs that want a slow-melting, low-dilution cube Sites with a reliable water supply and drain that need steady, ambient-independent production Operations that may scale up later by stacking a second head on the same bin Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high Condenser / Cooling Water-cooled Ice Production (nominal) 507 lb (230 kg) / 24 h Ice Production (ASHRAE) 456 lb (207 kg) / 24 h Production Range (across conditions) ~432–531 lb (196–241 kg) / 24 h Cubes per Cycle ~200 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) 1,220 W ASHRAE Cooling Capacity 10,639 BTU/h (3,118 W) Heat Rejected 8,250 BTU/h (2,418 W) Energy Use 4.3 kWh / 100 lb of ice Water Consumption 577 gal / 100 lb of ice (91.1 L/h) — includes single-pass condenser water Wiring / Fuse 12 AWG (2.5 mm²), 3-conductor / 16 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 30" × 24.41" × 19.69" (762 × 620 × 500 mm) Shipping Dimensions (W × D × H) 32.92" × 25" × 24.61" (836 × 635 × 625 mm) Net Weight 143 lb (65 kg) Shipping Weight 174 lb (79 kg) Certifications NSF, ETL (Intertek) Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS102 — double 10" anti-limescale + anti-chlorine water filter CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine) Stacking kit — to install two heads on a single bin Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1400, and SCD1800 (larger bins support two stacked heads). 💡The SPIKA MS500W1F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid the extra water use? The air-cooled SPIKA MS500A1F makes the same full-dice cube. Need a smaller, faster-chilling cube for high-volume fountain service? See the half-dice SPIKA MS500W1H.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$4,259.50