
$8,000.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The SPIKA MS1500R 48" is the top of ITV's modular cube line: a single 48"-wide head paired with a separate RC15V remote air-cooled condenser, connected by a field-installed refrigerant line set. Moving the condenser away from the head directs its waste heat outdoors or into a mechanical space rather than the kitchen, reducing ambient heat and noise where staff work and allowing the system to sustain very high output. The remote condenser is rated to operate in ambient temperatures from −4°F to 122°F, so it can be mounted outdoors in most climates. At nominal conditions, the MS1500A1FR makes about 1,698 lb (770 kg) per day — and roughly 1,576 lb (715 kg) at ASHRAE conditions — the most of any single-head SPIKA. It runs on 208–230V / 60 Hz single-phase power, with the head and the RC15V condenser each on their own circuit. The ice is full dice — about 1" × 0.9" × 1" (26 × 23 × 26 mm). This classic cube is clear, dense, and slow to melt, so it cools drinks without watering them down — the preferred choice for bars, restaurants, and premium beverage service. The machine forms about 640 cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with ITV's larger storage bins and can be stacked two-high on the biggest SCD-series bins to push capacity even higher in the same floor space. A smart electronic control board manages all parameters and displays self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. A remote system requires professional installation of the condenser and refrigerant lines. Key Features Remote air condenser (RC15V): keeps condenser heat and noise out of the work area; rated for outdoor mounting (−4°F to 122°F) Highest-output single-head SPIKA: up to 1,698 lb (770 kg) per day; ~1,576 lb (715 kg) at ASHRAE 208–230V / 60 Hz / single-phase power (head and condenser on separate circuits) Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — clear, slow-melting, premium presentation Approx. 640 cubes per cycle Stackable two-high on the largest SCD-series bins Energy: 3.86 kWh / 100 lb of ice Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For The highest-volume operations needing maximum ice from a single head Bars, restaurants, and premium beverage service that want a clear, slow-melting cube Sites that need to keep condenser heat and noise out of the kitchen or service area Large restaurants, cafeterias, hotels, banquet, and catering operations Installations with a suitable roof, mechanical room, or outdoor location for the condenser Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular head with remote air condenser (requires RC15V condenser + separate storage bin); stackable 2-high on larger bins Condenser / Cooling Air-cooled, remote condenser (RC15V, sold separately) Ice Production (nominal) 1,698 lb (770 kg) / 24 h Ice Production (ASHRAE) 1,576 lb (715 kg) / 24 h Production Range (across conditions) ~1,335–1,708 lb (606–775 kg) / 24 h Cubes per Cycle ~640 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) Head 2,700 W + RC15V condenser 206 W ASHRAE Cooling Capacity 28,746 BTU/h (8,424 W) Heat Rejected 19,250 BTU/h (5,640 W) — at remote condenser Energy Use 3.86 kWh / 100 lb of ice Water Consumption† ≈40.76 gal (154 L) / 100 lb of ice Wiring / Fuse (head) 14 AWG (2.5 mm²), 3-conductor / 25 A fuse Wiring / Fuse (RC15V condenser) 16 AWG (1.5 mm²), 3-conductor / 25 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range (machine) 41–109°F (5–43°C) Ambient Temp. Range (remote condenser) −4–122°F (−20–50°C) — outdoor-capable Water Temp. Range 41–95°F (5–35°C) Head Dimensions (W × D × H) 48" × 24" × 30" (1220 × 620 × 763 mm) Head Shipping Dimensions 51" × 27" × 34" (1290 × 685 × 890 mm) Head Weight (net/shipping) 320 lb (145 kg) / 373 lb (169 kg) RC15V Condenser Dimensions (approx.) ~45" × 29" × 33.5" (1145 × 729 × 850 mm) Certifications NSF, ETL (Intertek) †The remote datasheet's water-consumption column reads ambiguously (40.76 / 10.76); the figure shown reflects the higher gal/100 lb reading. Confirm exact water use with ITV. Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Required (sold separately): RC15V remote air condenser — mounts on a roof, in a mechanical room, or outdoors Refrigerant line set — field-installed between head and RC15V condenser Storage bin — head is head-only Optional (not included): CS102 — double 10" anti-limescale + anti-chlorine water filter CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine) Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S900, S1050, SCD900, SCD1400, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS1500A1FR is a head-only unit and requires the RC15V remote condenser, a refrigerant line set, and a separate storage bin to operate. Need a compact cube that packs densely for high-volume dispensing? See the half-dice SPIKA MS1500A1HR. Don't need a remote condenser? See the self-contained SPIKA MS1500A1F.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$8,000.00