
$6,487.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The SPIKA MS1000 is one of ITV's large-format modular cube machines, built to feed high-demand beverage and food-service operations from a single 30"-wide head. This W2H version runs on 208–230V / 60 Hz single-phase power and uses water cooling, which makes it especially well suited to hot or poorly ventilated rooms. Water cooling transfers condenser heat to a water loop rather than blowing it into the room, so the machine runs cooler and quieter and — importantly at this capacity — maintains its output far better when ambient temperatures climb. At ASHRAE conditions, this water-cooled head is rated at about 915 lb/day, compared with roughly 730 lb/day for the equivalent air-cooled model, a meaningful advantage in hot kitchens. The trade-off is water use: beyond the water consumed to make ice, a water-cooled condenser consumes a substantial amount of additional water, so it's best where ambient heat or ventilation is the limiting factor and that water cost is acceptable. Water-cooled SPIKA units are typically supplied as a special order. The ice is half dice — about 0.9" × 0.4" × 1" (23 × 11 × 26 mm). These smaller, flatter cubes pack tightly into a cup, expose more surface area to cool drinks quickly, and stretch further per pound, which makes them ideal for soft-drink fountains, self-serve dispensing, and high-volume food service. The machine forms about 800 cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with a wide range of ITV storage bins, and it can be stacked two-high on the larger SCD-series bins to roughly double output in the same floor footprint. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. Key Features Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms High capacity: up to 974 lb (442 kg) per day; ~915 lb (415 kg) at ASHRAE — strong high-ambient performance 208–230V / 60 Hz / single-phase power on a 16 A circuit Compact half-dice cube: ~0.9" × 0.4" × 1" (23 × 11 × 26 mm) — packs densely and chills drinks fast Approx. 800 cubes per cycle Stackable two-high on larger SCD-series bins to roughly double output Energy: 3.7 kWh / 100 lb of ice (more efficient than the air-cooled model) Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Hot kitchens or rooms with limited ventilation where air-cooled output would suffer High-volume soft-drink fountains and self-serve beverage dispensing Large restaurants, cafeterias, hotels, and catering operations Sites where lower noise and heat output in the room are priorities and water cost is acceptable Full Specifications Specification Detail Ice Type Half-dice cube, ~0.9" × 0.4" × 1" (23 × 11 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins Condenser / Cooling Water-cooled Ice Production (nominal)* 974 lb (442 kg) / 24 h Ice Production (ASHRAE)* 915 lb (415 kg) / 24 h Production Range (across conditions)* ~810–991 lb (367–450 kg) / 24 h Cubes per Cycle ~800 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) 1,540 W ASHRAE Cooling Capacity 17,586 BTU/h (5,154 W) Heat Rejected 12,024 BTU/h (3,524 W) Energy Use 3.7 kWh / 100 lb of ice Water Consumption (ice-making) 14.8 gal (55.9 L) / 100 lb of ice Water Consumption (condenser, additional) 51.8 gal (196.42 L) / 100 lb of ice Wiring / Fuse 12 AWG (2.5 mm²), 3-conductor / 16 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 30" × 24.41" × 29.92" (762 × 620 × 760 mm) Shipping Dimensions (W × D × H) 34.41" × 25" × 32.92" (874 × 635 × 836 mm) Net Weight 231 lb (105 kg) Shipping Weight 243 lb (110 kg) Certifications NSF, ETL (Intertek) *Production figures are the documented full-dice water-cooled values; the datasheet does not publish separate half-dice output. Across the SPIKA line, half-dice production runs comparable to full dice. Confirm the exact half-dice rating with ITV. Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS112 — double 11" anti-limescale + anti-chlorine water filter CS11 — 11" replacement cartridge (anti-limescale + anti-chlorine) Stacking kit — for mounting two heads on a single larger bin Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S500, S750, S900, S1050, SCS350, SCS700, SCD900, SCD1400, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS1000W2H is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS1000A2H. Prefer a larger, slow-melting cube for bar and premium service? See the full-dice SPIKA MS1000W2F.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$6,487.50