
$6,487.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The SPIKA MS1000 is one of ITV's large-format modular cube machines, built to feed high-demand beverage and food-service operations from a single 30"-wide head. This W2F version runs on 208–230V / 60 Hz single-phase power and uses water cooling, which makes it especially well suited to hot or poorly ventilated rooms. Water cooling transfers condenser heat to a water loop instead of blowing it into the room, so the machine runs cooler and quieter and — importantly at this capacity — holds its output far better when ambient temperatures climb. At ASHRAE conditions, this water-cooled head is rated about 915 lb/day versus roughly 730 lb/day for the equivalent air-cooled model, a meaningful advantage in hot kitchens. The trade-off is water use: beyond the water consumed to make ice, a water-cooled condenser consumes a substantial amount of additional water, so it's best where ambient heat or ventilation is the limiting factor and that water cost is acceptable. Water-cooled SPIKA units are typically supplied as a special order. Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 400 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with a wide range of ITV storage bins, and it can be stacked two-high on the larger SCD-series bins to roughly double output in the same floor footprint. A smart electronic control board manages all parameters and displays self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. Key Features Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms High capacity: up to 974 lb (442 kg) per day; ~915 lb (415 kg) at ASHRAE — strong high-ambient performance 208–230V / 60 Hz / single-phase power on a 16 A circuit Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube Approx. 400 cubes per cycle Stackable two-high on larger SCD-series bins to roughly double output Energy: 3.7 kWh / 100 lb of ice (more efficient than the air-cooled model) Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Hot kitchens or rooms with limited ventilation where air-cooled output would suffer Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter Large restaurants, cafeterias, hotels, and catering operations needing high full-dice capacity Sites where lower noise and heat output in the room are priorities and water cost is acceptable Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins Condenser / Cooling Water-cooled Ice Production (nominal) 974 lb (442 kg) / 24 h Ice Production (ASHRAE) 915 lb (415 kg) / 24 h Production Range (across conditions) ~810–991 lb (367–450 kg) / 24 h Cubes per Cycle ~400 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) 1,540 W ASHRAE Cooling Capacity 17,586 BTU/h (5,154 W) Heat Rejected 12,024 BTU/h (3,524 W) Energy Use 3.7 kWh / 100 lb of ice Water Consumption (ice-making) 14.8 gal (55.9 L) / 100 lb of ice Water Consumption (condenser, additional) 51.8 gal (196.42 L) / 100 lb of ice Wiring / Fuse 12 AWG (2.5 mm²), 3-conductor / 16 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Cabinet Dimensions (W × D × H) 30" × 24.41" × 29.92" (762 × 620 × 760 mm) Shipping Dimensions (W × D × H) 34.41" × 25" × 32.92" (874 × 635 × 836 mm) Net Weight 231 lb (105 kg) Shipping Weight 243 lb (110 kg) Certifications NSF, ETL (Intertek) Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Optional (not included): CS112 — double 11" anti-limescale + anti-chlorine water filter CS11 — 11" replacement cartridge (anti-limescale + anti-chlorine) Stacking kit — for mounting two heads on a single larger bin Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S500, S750, S900, S1050, SCS350, SCS700, SCD900, SCD1400, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS1000W2F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS1000A2F. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS1000W2H.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$6,487.50