
$6,539.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The SPIKA MS1000 REMOTE is ITV's large-format modular cube machine for operations that want maximum ice and minimum heat in the room. The MS1000A2FR pairs a 30"-wide head with a separate RC10 remote air-cooled condenser, connected by a field-installed refrigerant line set. Moving the condenser away from the head sends its waste heat outdoors or into a mechanical space instead of the kitchen, which lowers ambient heat and noise where staff work and helps the system hold high output. That remote configuration also lifts capacity: at nominal conditions the MS1000A2FR makes about 1,041 lb (472 kg) per day — and roughly 1,006 lb (456 kg) at ASHRAE conditions — noticeably more than the self-contained MS1000A2F. It runs on 208–230V / 60 Hz single-phase power, with the head and the RC10 condenser each on their own circuit. Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 400 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes. The head pairs with a wide range of ITV storage bins and can be stacked two-high on the larger SCD-series bins to roughly double output in the same floor footprint. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. A remote system requires professional installation of the condenser and refrigerant lines. Key Features Remote air condenser (RC10): keeps condenser heat and noise out of the work area High capacity: up to 1,041 lb (472 kg) per day; ~1,006 lb (456 kg) at ASHRAE — more than the self-contained model 208–230V / 60 Hz / single-phase power (head and condenser on separate circuits) Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube Approx. 400 cubes per cycle Stackable two-high on larger SCD-series bins to roughly double output Energy: 4.46 kWh / 100 lb of ice Patented smart water distributor for clean, consistent cubes and better scale resistance High-efficiency vertical plate evaporator Smart electronic control board with self-diagnostics Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation) High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame) Ice scoop included NSF and ETL (Intertek) certified Best For Sites that need to keep condenser heat and noise out of the kitchen or service area Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter Large restaurants, cafeterias, hotels, and catering operations wanting maximum throughput Installations with a suitable roof, mechanical room, or outdoor location for the condenser Full Specifications Specification Detail Ice Type Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) Machine Type Modular head with remote air condenser (requires RC10 condenser + separate storage bin); stackable 2-high on larger bins Condenser / Cooling Air-cooled, remote condenser (RC10, sold separately) Ice Production (nominal)* 1,041 lb (472 kg) / 24 h Ice Production (ASHRAE)* 1,006 lb (456 kg) / 24 h Production Range (across conditions)* ~728–1,076 lb (330–488 kg) / 24 h Cubes per Cycle ~400 Refrigerant R404A Electrical 208–230 V / 60 Hz / 1-phase (±10%) Power Consumption (at 109°F) Head 1,912 W + RC10 condenser 206 W ASHRAE Cooling Capacity 23,892 BTU/h (7,002 W) Heat Rejected 13,294 BTU/h (3,896 W) — at remote condenser Energy Use 4.46 kWh / 100 lb of ice Water Consumption (ice-making) ≈14.8 gal (55.9 L) / 100 lb of ice Wiring / Fuse (head) 14 AWG (2.5 mm²), 3-conductor / 20 A fuse Wiring / Fuse (RC10 condenser) 14 AWG (1.5 mm²), 3-conductor / 10 A fuse Operating Pressure 14.5–87 psi (1–6 bar) Ambient Temp. Range 41–109°F (5–43°C) Water Temp. Range 41–95°F (5–35°C) Head Dimensions (W × D × H) 30" × 24" × 30" (762 × 620 × 762 mm) Head Shipping Dimensions 34.41" × 25" × 32.92" (874 × 635 × 836 mm) Head Weight (net/shipping) 214 lb (97 kg) / 246 lb (112 kg) RC10 Condenser Dimensions (W × D × H) 29.37" × 16.81" × 22.29" (746 × 427 × 566 mm) RC10 Shipping Dimensions 30.32" × 20.08" × 27.56" (770 × 510 × 700 mm) RC10 Weight (net/shipping) 88 lb (40 kg) / 110 lb (50 kg) Certifications NSF, ETL (Intertek) *Production figures are the documented half-dice values; the datasheet does not publish separate full-dice output. Across the SPIKA line, full-dice production runs comparable to half-dice. Confirm the exact full-dice rating with ITV. The remote datasheet's water-consumption column reads ambiguously; the figure shown reflects the MS1000 platform (air-cooled, ice-making water only). Confirm exact water use with ITV. Warranty Ice machine: 3 years parts and labor Evaporator: 5 years parts and labor Compressor: 5 years parts Accessories Included: ice scoop Required (sold separately): RC10 remote air condenser — mounts on a roof, in a mechanical room, or outdoors Refrigerant line set — field-installed between head and RC10 condenser Storage bin — head is head-only Optional (not included): CS112 — double 11" anti-limescale + anti-chlorine water filter CS11 — 11" replacement cartridge (anti-limescale + anti-chlorine) Stacking kit — for mounting two heads on a single larger bin Adapter plates — for mounting on various storage bins Scale Kleen — descaling/cleaning solution Recommended storage bins: S500, S750, S900, S1050, SCS350, SCS700, SCD900, SCD1400, and SCD1800 (larger SCD bins support two stacked heads). 💡The SPIKA MS1000A2FR is a head-only unit and requires the RC10 remote condenser, a refrigerant line set, and a separate storage bin to operate. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS1000A2HR. Don't need a remote condenser? See the self-contained SPIKA MS1000A2F.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$6,539.50