SpeedFactory Racing 4 Bar MAP Sensor for B/D/F/H and S2000 (1-43+PSI)

SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Key Features: * 40 to 260 degrees Fahrenheit temperature operating range * Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market). * Automatic temperature compensation. * True linear scaling for perfect drivability at all boost and vacuum levels. * Compatible with all aftermarket engine management systems. * Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. * Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors. * Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor. * Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping NOTE: Requires proper sensor calibration with a programmable engine management system. Fitments: B/D/F/H Series Engines 94-01 Acura Integra 90-93 Acura Integra (will require 94-01 Integra Throttle Body) 97-99 Acura CL All Models 01-03 Acura CL V6 (premium only) 99-03 Acura TL All Models 88-00 Honda Civic All Models 92-01 Honda Prelude All Models 00-05 Honda S2000 94-02 Honda Accord All 4 cyl Models 93-97 Honda Del Sol All Models 97-01 Honda CR-V All Models