Sonax Cut & Finish

SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray and sanding marks following repair spraying. High abrasion with simultaneous good degree of shine, workable for a long time, with outstanding wipe off feature. Ideal for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper. Silicone-free. SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray and sanding marks following repair spraying. High abrasion with simultaneous good degree of shine, workable for a long time, with outstanding wipe off feature. Ideal for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper. Silicone-free.   Directions for use: Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad. . Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth. Please note: Do not allow polishing area to overheat. Regularly clean polishing sponges. Never use different polishes on one sponge, Keep from freezing. Product Size: 250ml (8.45 FL OZ) 1 Liter