Solid State Waterbed Heater Pad — Backer Heating Technologies

Experience Top-Notch Comfort with our Waterbed Heater Dual waterbed bladders? Two waterbed heaters heat both sides separately!  Both heaters feature an integrated thermometer, and hardwired connections, making for a much easier installation than traditional heaters.    Select the 325 watt deep feel heater, if you are ordering for a hardside waterbed, or an 8" Fill depth softside waterbed system   Select the 170 Watt heater if you are ordering a 6.25" or 3.5"  fill depth softside waterbed, or if you are ordering an softside bladder in a dual (2 separate bladders) You will need to order 2 if you have or are ordering a Dual waterbed system Waterbed Heater Instructions Solid-state waterbed heaters by Backer Heating Technologies of Sweden are the safest, best-designed heaters on the market today. Made in Europe to exacting standards, these etched copper foil low-watt density heater pads feature soldered copper-to-copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies, you get Swedish quality and safety.Designed to maintain the ideal temperature in your waterbed or HyrdoMattress™ this heater adds temperature control for a comfortable and restful sleep. The precision solid-state temperature controls will provide years of trouble-free service. It is our opinion Backer Heating Technologies makes the best waterbed heater available. Safe and Reliable Backer Heating Technologies has been in the heater-making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market. Backer Heating Technologies has become a world leader by supplying over 20 million heaters annually to the automotive industry globally. Becker Heating Technologies' design and manufacturing capabilities are driven by a philosophy of excellence, utilizing the most stringent standards to test and engineer the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases. Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit, informing you the unit is in "heating mode." By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark.  Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the control unit maintains the water temperature within +/- 1 degrees to keep you cozy and comfortable until you decide to change it. In addition, the Control Unit monitors your comfort level and maintains the life of your mattress. The heater's solid-state construction prevents those "clicking" noises often found irritating in "old mechanical-style" heaters. The solid-state construction means that with no moving parts in the temperature control unit, the expected lifetime and accuracy are greater than most competing models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation, operates with one of the lowest electromagnetic fields available on the market today. Highest International Standards The heater and control units are designed to UL 1445 standards and certified by ETL for USA and Canada. The Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in the production and testing of our products. Control Unit The smaller design of the solid-state Backer Heating Technologies control unit allows easy passage through most waterbed frames. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spikes up to 1500V. *Note: The control unit generates minimal heat and should never be left in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. The Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. NOTE: DURING THE FILLING OR EMPYING OF A WATERBED OR HYRDOMATTRESS™, THE ELEMENT MUST BE UNPLUGGED.