Solid Color Epoxy Pigment

**Note: this product replaced the previous 500ml jars of solid color pigment. This product is much easier to work with as it can easily be squeezed out of the bottle directly into the epoxy and blends much easier. This bottle will still treat a full 1.5 gallon kit of Ultra Z Poxy. Z Counterform Solid Color Epoxy Pigment is added to Ultra Z Poxy for a solid uniform base color. It can be used in a primer coat or as a top coat base color which Metallics can then be introduced to. Also, it works well to add veins in a metallic top coat to create a "fracture" that mimics natural stone. Color Chart Below. Directions: To use, cut top of squeeze bottle. Squeeze pigment into part A and blend well before mixing with Part B of epoxy. This 4 oz. bottle will treat a full 1.5 gallon kit of Ultra Z Poxy (meaning mix with 1 gallon of part A first). If you are mixing less than a full 1.5 gallon kit of epoxy, keep proportions the same for an opaque color. If a lighter or more translucent color is desired, less pigment may be added. Pigments can be mixed to create custom colors. Do not exceed 8 oz. of pigment in a 1.5 gallon kit of Ultra Z Poxy. Each squeeze bottle contains 4 fl. oz. of Solid Color Epoxy Pigment. It can treat up to 1.5 gal of Ultra Z Poxy. Click HERE for Countertop Instructions Warning: Colors may vary slightly from what you see on your computer monitor. These are only meant to be a close representation. Please verify color with test piece before doing full project.